ALL CORRECT ANSWERS 100% SOLVED AND
GUARANTEED SUCCESS!!
Overhead cranes with more than Its rated load marked on it.
one hoisting unit shall have?
How often does O.S.H.A. require Once a month
a written wire rope inspection?
What is the purpose of the "E" Removes power to entire crane.
(Emergency) stop on an
overhead crane?
Most loads should be rigged to 5
within how many degrees of
level?
According to ASME B30.2, 5 to 1
what is the safety factor
for rigging?
According to O.S.H.A. frequent Daily to monthly
inspections shall be performed?
According to ASME B30.2 a Designated person
frequent inspection must
be performed by a?
According to OSHA, the 10 degrees
maximum twist of the hook
can't exceed?
When inspecting electrical Pitted or burned
contacts, what are the signs they
are bad?
According to ASME B30.2, what 10BC
type of fire extinguisher is
required for overhead
cranes?
Before leaving an overhead crane Lowered to the floor
unattended, attached loads should
, be?
Before using your hand to Follow company policy
steady any load, you should?
According to OSHA, the rated Clearly marked on the side of the crane
capacity of all overhead cranes
shall be?
When attaching spreaders to any The lower the spreader angle the greater the tension
load, you must keep in mind
that?
By order of hitch strength, Basket, vertical, choker
which is correct?
a. Vertical,basket, choker
b. Basket, vertical, choker
c. Basket, choker, vertical
d. Choker, basket, vertical
According to OSHA, the 15% of its original size
maximum hook throat
opening must not exceed?
How many cubic feet is in a 30 cubic feet
rectangular object that measures
S At. X3 At. X2 ft.?
An object weighs 150 lbs per 5,400 lbs
cubic foot and measures 4 ft.
X3 A. X3 ft., what is its
weight?
According to OSHA, how many 2 wraps
wraps must be left on the hoist
drum of an overhead
crane with the
hook at its lowest position?