NCCER-OSHA SCAFFOLD SG (ACTUAL EXAM 2025/2026) QUESTIONS AND
VERIFIED ANSWERS 100% CORRECT
The footing or anchorage for scaffolds must be capable of carrying the maximum intended load
without:
-
Answer-Tying or guying
Erectors of a scaffold who exposed to potential falling object hazards shall be provided with: -
Answer-Over head protection
Osha requires a rest landing at intervals not exceed: -
Answer-35 feet
The top handrail of a scaffold must be able to withstand how many pounds of pressure? -
Answer-200
When Building a scaffold inside a "goggle area" -
Answer-Everyone inside the area must wear goggles
The ladder should be located on a mobile scaffold will not -
Answer-tip over
When should ties be installed? -
Answer-During the erection process
What body produces the primary Code or regulations guiding the scaffolding industry? -
Answer-OSHA (Occupational Safety and Healthy Agency)
What should be used to erect scaffolding on uneven ground? -
Answer-Leveling Jacks
OSAH specifically prohibits the use of? -
Answer-Lean to scaffolds
,Boards or wooden pad placed on the soil to support scaffold legs are? -
Answer-Mudsills
, The tube of a tube and clamp scaffold is normally what size O.D.? -
Answer-1.9 Inches
Scaffold decks that overlap a minimum of how many inches, unless secured in some other way? -
Answer-12
the bearer in a tube and clamp scaffold is always? -
Answer-Placed above the adjacent runner.
What must a rolling scaffold have on each caster or roller? -
Answer-Positive locking device
Who must inspect a scaffold each work shift and after any occurrence which could effect a scaffold's
structural integrity? -
Answer-Competent person
What is the minimum tensile strength of D-rings and snap hooks on a safety harness? -
Answer-5,000 pounds
What part of the picture is identified by the letter "G"? -
Answer-Sill or mudsill
what part of the scaffold is identified by letter "A"? -
Answer-Guardrail
What part of the scaffold is identified by the letter "C"? -
Answer-Runner
What part of the scaffold is identified by the letter "F"? -
Answer-Base plate
When is it allowed to notch out scaffold planks to make them fit? -
VERIFIED ANSWERS 100% CORRECT
The footing or anchorage for scaffolds must be capable of carrying the maximum intended load
without:
-
Answer-Tying or guying
Erectors of a scaffold who exposed to potential falling object hazards shall be provided with: -
Answer-Over head protection
Osha requires a rest landing at intervals not exceed: -
Answer-35 feet
The top handrail of a scaffold must be able to withstand how many pounds of pressure? -
Answer-200
When Building a scaffold inside a "goggle area" -
Answer-Everyone inside the area must wear goggles
The ladder should be located on a mobile scaffold will not -
Answer-tip over
When should ties be installed? -
Answer-During the erection process
What body produces the primary Code or regulations guiding the scaffolding industry? -
Answer-OSHA (Occupational Safety and Healthy Agency)
What should be used to erect scaffolding on uneven ground? -
Answer-Leveling Jacks
OSAH specifically prohibits the use of? -
Answer-Lean to scaffolds
,Boards or wooden pad placed on the soil to support scaffold legs are? -
Answer-Mudsills
, The tube of a tube and clamp scaffold is normally what size O.D.? -
Answer-1.9 Inches
Scaffold decks that overlap a minimum of how many inches, unless secured in some other way? -
Answer-12
the bearer in a tube and clamp scaffold is always? -
Answer-Placed above the adjacent runner.
What must a rolling scaffold have on each caster or roller? -
Answer-Positive locking device
Who must inspect a scaffold each work shift and after any occurrence which could effect a scaffold's
structural integrity? -
Answer-Competent person
What is the minimum tensile strength of D-rings and snap hooks on a safety harness? -
Answer-5,000 pounds
What part of the picture is identified by the letter "G"? -
Answer-Sill or mudsill
what part of the scaffold is identified by letter "A"? -
Answer-Guardrail
What part of the scaffold is identified by the letter "C"? -
Answer-Runner
What part of the scaffold is identified by the letter "F"? -
Answer-Base plate
When is it allowed to notch out scaffold planks to make them fit? -
