1|Page
CWB Welding Inspector Level 3
Certification 2025 — Study Guide, Exam
Preparation, and Practice Test Questions
Prepare for the CWB Welding Inspector Level 3 Certification Exam 2025 with the latest
study guide, practice test questions, and welding inspection training resources. Learn
advanced non-destructive testing, welding codes, inspection procedures, and quality control
standards to achieve your CWB Level 3 certification and boost your welding career.
• CWB Welding Inspector Level 3 exam 2025
• Canadian Welding Bureau Level 3 certification
• CWB Level 3 study guide
• Welding inspector Level 3 practice test
What is the application for 7XXX series? - ANSWER-1. Used for aircraft structures where the product can
be clad to prevent corrosion or the components are continually inspected for signs of stress corrosion
cracking.
2. AA 7004 & AA 7005 are used for welded ground transportation vehicles
What does the last 2 digits of AA 1050 indicates? - ANSWER-99.50 % min Al
What does the last 2 digits of AA 1065 indicates? - ANSWER-99.65 % min Al
What is the principle alloying addition for 3XXX series? - ANSWER-Manganese .. it imparts greater
strength to Al while maintaining excellent ductility or foamability
,2|Page
What is the application for AA3304 and AA3014 ? - ANSWER-Best used for beverage cans
Where is AA 4XXX series used for ? - ANSWER-For welding and brazing filler alloys
What is the principle alloying addition for 4XXX series? - ANSWER-Silicon, lowers the melting point of the
alloys making them suitable for brazing
What is the principle alloying addition for 5XXX series? - ANSWER-Magnesium... Work hardening alloys...
Alloys with less than 3% Mg have good corrosion resistance whereas alloys having more than 3% Mg can
be susceptible for exfoliation and stress corrosion
What is the principle alloying addition for 6XXX series? - ANSWER-Mg and Si
Where is AA 6XXX series used for ? - ANSWER-Fabrication of general structures (extrusions welded to the
dump body truck sides as stiffeners) and in rolled form for automotive outer panels
What is the alloying addition for 7XXX series? - ANSWER-1. Zinc and Magnesium for high strength
2. Cu is also added for high strength but alloys are susceptible for stress corrosion cracking. High Cu
content deems the alloy unweldable
Which are the non-heat treatable alloys? - ANSWER-1XXX,3XXX,4XXX & 5XXX
How does the non-heat treatable alloys reach full potential of their strength? - ANSWER-By work
hardening. (cold rolling or drawing)
How is the final temper obtained in the non-heat treatable alloys ? - ANSWER-Work hardening alone,
work hardening followed by partial annealing or work hardening followed by stabilizing
, 3|Page
What is stabilizing treatment after work hardening of the non-heat treatable alloys ? - ANSWER-thermal
treatment ,at low temperature that may be given to alloys such as AA-5052 and AA-5454 that otherwise
would tend to "age-soften" after production. The stabilization treatment usually improves ductility.
How does the letter "H" specification (1st digit) of work hardening/ tempering applies to the non-heat
treatable alloys ? - ANSWER-H1 - The material has been work-hardened
H2 - The material has been work-hardened and partially annealed
H3 - The material has been work-hardened and Stabilized
How does the 2nd digit applies to the non-heat treatable alloys ? - ANSWER-> 0-8
> denotes the degree of work hardening.
8 - tempers having a UTS eqv to that achieved by a cold reduction of approx 75% of the metal from its
softest stage.
0 is Fully annealed - the softest temper
F - As fabricated
True / False
Materials having the F temper should not be used for structural welding - ANSWER-True
What is the annealing temp for 1XXX & 5XXX series ? - ANSWER-345 C
What are the thermal processes which increase the strength of heat-treatable alloys? - ANSWER-Solution
heat treatment and aging
What is the aging temp and solution treatment emp for 2024 ? - ANSWER-aging temp = 160 C
solution treatment temp = 500 C
What is the aging temp and solution treatment emp for 6061 ? - ANSWER-aging temp = 175 C
solution treatment temp = 530 C
CWB Welding Inspector Level 3
Certification 2025 — Study Guide, Exam
Preparation, and Practice Test Questions
Prepare for the CWB Welding Inspector Level 3 Certification Exam 2025 with the latest
study guide, practice test questions, and welding inspection training resources. Learn
advanced non-destructive testing, welding codes, inspection procedures, and quality control
standards to achieve your CWB Level 3 certification and boost your welding career.
• CWB Welding Inspector Level 3 exam 2025
• Canadian Welding Bureau Level 3 certification
• CWB Level 3 study guide
• Welding inspector Level 3 practice test
What is the application for 7XXX series? - ANSWER-1. Used for aircraft structures where the product can
be clad to prevent corrosion or the components are continually inspected for signs of stress corrosion
cracking.
2. AA 7004 & AA 7005 are used for welded ground transportation vehicles
What does the last 2 digits of AA 1050 indicates? - ANSWER-99.50 % min Al
What does the last 2 digits of AA 1065 indicates? - ANSWER-99.65 % min Al
What is the principle alloying addition for 3XXX series? - ANSWER-Manganese .. it imparts greater
strength to Al while maintaining excellent ductility or foamability
,2|Page
What is the application for AA3304 and AA3014 ? - ANSWER-Best used for beverage cans
Where is AA 4XXX series used for ? - ANSWER-For welding and brazing filler alloys
What is the principle alloying addition for 4XXX series? - ANSWER-Silicon, lowers the melting point of the
alloys making them suitable for brazing
What is the principle alloying addition for 5XXX series? - ANSWER-Magnesium... Work hardening alloys...
Alloys with less than 3% Mg have good corrosion resistance whereas alloys having more than 3% Mg can
be susceptible for exfoliation and stress corrosion
What is the principle alloying addition for 6XXX series? - ANSWER-Mg and Si
Where is AA 6XXX series used for ? - ANSWER-Fabrication of general structures (extrusions welded to the
dump body truck sides as stiffeners) and in rolled form for automotive outer panels
What is the alloying addition for 7XXX series? - ANSWER-1. Zinc and Magnesium for high strength
2. Cu is also added for high strength but alloys are susceptible for stress corrosion cracking. High Cu
content deems the alloy unweldable
Which are the non-heat treatable alloys? - ANSWER-1XXX,3XXX,4XXX & 5XXX
How does the non-heat treatable alloys reach full potential of their strength? - ANSWER-By work
hardening. (cold rolling or drawing)
How is the final temper obtained in the non-heat treatable alloys ? - ANSWER-Work hardening alone,
work hardening followed by partial annealing or work hardening followed by stabilizing
, 3|Page
What is stabilizing treatment after work hardening of the non-heat treatable alloys ? - ANSWER-thermal
treatment ,at low temperature that may be given to alloys such as AA-5052 and AA-5454 that otherwise
would tend to "age-soften" after production. The stabilization treatment usually improves ductility.
How does the letter "H" specification (1st digit) of work hardening/ tempering applies to the non-heat
treatable alloys ? - ANSWER-H1 - The material has been work-hardened
H2 - The material has been work-hardened and partially annealed
H3 - The material has been work-hardened and Stabilized
How does the 2nd digit applies to the non-heat treatable alloys ? - ANSWER-> 0-8
> denotes the degree of work hardening.
8 - tempers having a UTS eqv to that achieved by a cold reduction of approx 75% of the metal from its
softest stage.
0 is Fully annealed - the softest temper
F - As fabricated
True / False
Materials having the F temper should not be used for structural welding - ANSWER-True
What is the annealing temp for 1XXX & 5XXX series ? - ANSWER-345 C
What are the thermal processes which increase the strength of heat-treatable alloys? - ANSWER-Solution
heat treatment and aging
What is the aging temp and solution treatment emp for 2024 ? - ANSWER-aging temp = 160 C
solution treatment temp = 500 C
What is the aging temp and solution treatment emp for 6061 ? - ANSWER-aging temp = 175 C
solution treatment temp = 530 C
