Texas State Inspector Safety Certification Exam
TEXAS STATE INSPECTOR SAFETY CERTIFICATION EXAM
NEWEST ACTUAL EXAM COMPLETE QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED
A+||BRAND NEW VERSION!!
A truck or trailer is required to have clearance lamps and side marker
lamps if the total width of the vehicle is: - Correct Answer-80 inches or
more
In order to pass inspection, tires must have a tread depth of at least ___
in the two center adjacent major grooves. - Correct Answer-2/32 inch
A parking brake is required to be inspected on all cars and trucks
beginning with the model year: - Correct Answer-1960
The exhaust system includes the following: - Correct Answer-Manifold,
Exhaust Pipe, Muffler(All of the above)
A muffler with a hole which has been patched: - Correct Answer-Will be
rejected
Fluid level in the brake master cylinder must not be more than how
many inches below the top of the reservoir? - Correct Answer-1 inch
1|Page
, Texas State Inspector Safety Certification Exam
When using a window tint meter, the amount of light transmission
cannot be less than? - Correct Answer-25%
When required, safety guards or flaps must be what width? - Correct
Answer-At least as wide as the tires they are protecting.
Sun screening or glass coating material will be an item of inspection on
the following vehicles: - Correct Answer-All vehicles regardless of year
A motor vehicle originally equipped with a catalytic converter will be
rejected if the catalytic converter has been removed or disconnected
beginning with year model - Correct Answer-1984
When checking operation of the headlamps, a vehicle will be rejected if:
- Correct Answer-Physical damage would obviously cause a handlamp
beam to fail to sufficiently illuminate the roadway ahead of the vehicle
A license plate lamp must be white in color and rejected for: - Correct
Answer-Mounting, Shoddy wiring, Lamp lens is broken or does not fit
properly(All of the above)
2|Page
TEXAS STATE INSPECTOR SAFETY CERTIFICATION EXAM
NEWEST ACTUAL EXAM COMPLETE QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED
A+||BRAND NEW VERSION!!
A truck or trailer is required to have clearance lamps and side marker
lamps if the total width of the vehicle is: - Correct Answer-80 inches or
more
In order to pass inspection, tires must have a tread depth of at least ___
in the two center adjacent major grooves. - Correct Answer-2/32 inch
A parking brake is required to be inspected on all cars and trucks
beginning with the model year: - Correct Answer-1960
The exhaust system includes the following: - Correct Answer-Manifold,
Exhaust Pipe, Muffler(All of the above)
A muffler with a hole which has been patched: - Correct Answer-Will be
rejected
Fluid level in the brake master cylinder must not be more than how
many inches below the top of the reservoir? - Correct Answer-1 inch
1|Page
, Texas State Inspector Safety Certification Exam
When using a window tint meter, the amount of light transmission
cannot be less than? - Correct Answer-25%
When required, safety guards or flaps must be what width? - Correct
Answer-At least as wide as the tires they are protecting.
Sun screening or glass coating material will be an item of inspection on
the following vehicles: - Correct Answer-All vehicles regardless of year
A motor vehicle originally equipped with a catalytic converter will be
rejected if the catalytic converter has been removed or disconnected
beginning with year model - Correct Answer-1984
When checking operation of the headlamps, a vehicle will be rejected if:
- Correct Answer-Physical damage would obviously cause a handlamp
beam to fail to sufficiently illuminate the roadway ahead of the vehicle
A license plate lamp must be white in color and rejected for: - Correct
Answer-Mounting, Shoddy wiring, Lamp lens is broken or does not fit
properly(All of the above)
2|Page
