FDNY G.pdf: Official Guide to FDNY Grades, Ranks, and Salary Scales

Page 1 of 10


FDNY G-60 EXAM NEWEST 2025/2026 ACTUAL EXAM|

COMPLETE 100 REAL EXAM QUESTIONS AND

CORRECT VERIFIED ANSWERS/ ALREADY GRADED

A+| G-60 FDNY TEST PREP 2025 (BRAND NEW!!)

Sprinkler system must NOT be shut off or impaired while hot

work is performed .....ANSWER..... Place damp cloth guards on

individual sprinkler heads

The person conducting the fire watch ______ have other duties

.....ANSWER..... CANNOT

A portable fire extinguisher with a rating of _________ is

required and should be within ____ feet travel distance hot work

area .....ANSWER..... 2-A:20-B:C///30

For ROOFING OPERATIONS, a portable fire extinguisher with a

minimum rating of ______ is required .....ANSWER..... 3-A:40-B:C

Fire watch on floors below is ______ .....ANSWER..... required

, Page 2 of 10


The fire watch must continue for a minimum of ____ minutes after

the hot work is done .....ANSWER..... 30

For any CNG or LPG torch operations, the first inspection shall

be conducted ___ minutes after completion. The second

inspection shall be conducted _______ after completion of torch

operations. .....ANSWER..... 30 min///1 hour

The fire guard or fire watch personnel must complete a signed

inspection report and it must be submitted to and retained by the

person in charge of the torch operations. .....ANSWER..... The

report must be made available and maintained on the premises

for a minimum of 48 hours after the work is complete.

Most common fuel gasses used in blowtorches are ______

.....ANSWER..... LPG (butane, propane) natural gas (methane)

(either CNG or piped natural gasses)

Soldering and brazing temperatures are typically______

.....ANSWER..... 840 degrees F