IEC YEAR 2 FINAL EXAM LATEST 2024/2025
WITH ACTUAL QUESTIONS AND CORRECT
VERIFIED (DETAILED) ANSWERS/ALREADY
GRADED A
Duty on escalator and moving walk driving machine
motors shall be rated as ___.
Select one:
a. continuous
b. intermittent
c. varying
d. periodic
e. short-time - .....ANSWER ...✔✔ a. continuous
Each carnival ride and concession shall be provided with
a fused disconnect switch located within sight of and
within ___ feet of the operator's station.
Select one:
a. 8
b. 10
c. 6
d. 25
,2|Page
e. 50 - .....ANSWER ...✔✔ c. 6
An RV campground has 150 campsites with electrical
power. Twenty-five of the campsites are reserved as
tent sites. How many sites are required to have a 30-
amp, 125-volt receptacle?
Select one:
a. 0
b. 125
c. 150
d. 88
e. 25 - .....ANSWER ...✔✔ d. 88
Receptacles that provide shore power for boats shall be
rated not less than ___ amperes.
Select one:
a. 20
b. 30
c. 40
d. 50 - .....ANSWER ...✔✔ b. 30
Supply cords for mobile homes shall be rated not less
than ___ amperes.
,3|Page
Select one:
a. 100
b. 60
c. 50
d. 125 - .....ANSWER ...✔✔ c. 50
Overcurrent protection for feeders and branch circuits
supplying electric vehicle supply equipment shall have a
rating of not less than ___% of the maximum load of the
electric vehicle supply equipment.
Select one:
a. 80
b. 200
c. 125
d. 100
e. 150 - .....ANSWER ...✔✔ c. 125
Lamps in cellulose nitrate film storage vaults shall be
installed in rigid luminaires of the ___ type.I. glass-
enclosed II. guarded III. gasketed
Select one:
a. I & III only
b. I, II & III
, 4|Page
c. II & III only
d. II only
e. I & II only - .....ANSWER ...✔✔ a. I & III only
A theater stage switchboard is used primarily to feed
stage equipment and can contain ___, dimmers or relays
with associated overcurrent protective devices, or
overcurrent protective devices alone.
Select one:
a. fuses
b. dimmers
c. relays
d. all of these - .....ANSWER ...✔✔ d. all of these
A ___ is an assembly cable containing one male and
two female cord connectors used to connect two loads to
one branch circuit.
Select one:
a. tap box
b. splitter
c. transfer cable
d. two-fer
e. breakout assembly - .....ANSWER ...✔✔ d. two-fer