Page 1 of 31
Construction Drawing Test COMPLETE
NEWEST 150 QUESTIONS AND
VERIFIED SOLUTIONS LATEST
UPDATE THIS YEAR
QUESTION: To avoid confusion the letters I, O, and Q and the numbers 1 and 0 are omitted
from the
a. title block
b. NTS drawings
c. gridline system
d. contour lines - ANSWER-c. gridline system
QUESTION: To clarify information that cannot be shown on the drawings, the architectural and
engineering firm will prepare
a. a change order
b. a proposal
1
, Page 2 of 31
c. specifications
d. contracts - ANSWER-c. specifications or "Specs" come in a book format and are used to clarify
information that cannot be shown on the drawings.
QUESTION: The architect's scale is used for drawing
a. cut lines
b. floor plans
c. plot plans
d. specifications - ANSWER-b. floor plans
QUESTION: Information about the structure or assembly is provided in the
a. legend
b. border
c. title block
d. drawing area - ANSWER-c. title block
2
, Page 3 of 31
Q; The identification of lines and other symbols on a construction drawing is called the
a. index
b. title block
c. legend
d. scale - ANSWER-c. legend
QUESTION: Site plans are developed using a(n)
a. architect's scale
b. NTS scale
c. engineer's scale
d. 1/4"= 1'-0" scale - ANSWER-c. engineer's scale, Engineers Scale: 1" = 20'-0" - used on
Drawings such as Site Plans
QUESTION: A dimension is a measurement written as a
a, range
b. number
3
, Page 4 of 31
c. letter
d symbol - ANSWER-b. number
QUESTION: Gridlines are used to
a. indicate a cross-section of material
b. indicate that an object has been broken off
c. indicate land boundaries on the site plan
d. make it easy to refer to specific locations on the plan - ANSWER-d. make it easy to refer to
specific locations on the plan
QUESTION: On the drawing, a project is identified by the _____ found in the title block.
a. sheet title
b. company logo
c. scale
d. legend - ANSWER-a. sheet title
4
Construction Drawing Test COMPLETE
NEWEST 150 QUESTIONS AND
VERIFIED SOLUTIONS LATEST
UPDATE THIS YEAR
QUESTION: To avoid confusion the letters I, O, and Q and the numbers 1 and 0 are omitted
from the
a. title block
b. NTS drawings
c. gridline system
d. contour lines - ANSWER-c. gridline system
QUESTION: To clarify information that cannot be shown on the drawings, the architectural and
engineering firm will prepare
a. a change order
b. a proposal
1
, Page 2 of 31
c. specifications
d. contracts - ANSWER-c. specifications or "Specs" come in a book format and are used to clarify
information that cannot be shown on the drawings.
QUESTION: The architect's scale is used for drawing
a. cut lines
b. floor plans
c. plot plans
d. specifications - ANSWER-b. floor plans
QUESTION: Information about the structure or assembly is provided in the
a. legend
b. border
c. title block
d. drawing area - ANSWER-c. title block
2
, Page 3 of 31
Q; The identification of lines and other symbols on a construction drawing is called the
a. index
b. title block
c. legend
d. scale - ANSWER-c. legend
QUESTION: Site plans are developed using a(n)
a. architect's scale
b. NTS scale
c. engineer's scale
d. 1/4"= 1'-0" scale - ANSWER-c. engineer's scale, Engineers Scale: 1" = 20'-0" - used on
Drawings such as Site Plans
QUESTION: A dimension is a measurement written as a
a, range
b. number
3
, Page 4 of 31
c. letter
d symbol - ANSWER-b. number
QUESTION: Gridlines are used to
a. indicate a cross-section of material
b. indicate that an object has been broken off
c. indicate land boundaries on the site plan
d. make it easy to refer to specific locations on the plan - ANSWER-d. make it easy to refer to
specific locations on the plan
QUESTION: On the drawing, a project is identified by the _____ found in the title block.
a. sheet title
b. company logo
c. scale
d. legend - ANSWER-a. sheet title
4
