PCI Quality Control Technician Level 1 Chapter 1 Study Questions
and Verified Answers 2025
Terms in this set (13)
A commitment to quality starts The commitment to quality begins with a company's top management.
where in the organization?
Minimum items to be addressed by the QSM are:
-Management commitment
-Definition of organization structure
-Management review of the QA program
-Plant facilities layout and definition
Each plant should have a written QA -Purchasing procedures for QC compliance
program. What is this program -Uniform methods for reporting, reviewing, and maintaining records
called and what are the minimum -identification of training needs
items to be -Control, calibration, and paintenance of necessary equipment
addressed by it. -Standards for shop drawings to ensure accuracy and uniform
interpretation of instructions for manufacturing handling
-Procedures for review and dissemination of project-specific
requirements to production and quality control personell.
Categories of shop drawings:
-ERECTION DRAWINGS: Show an overall layout of products for a
particular area.
May be a wall layout (elevation) for architerctural concrete
There are several categories of cladding panels or a plan layout for double-tee floor members
shop drawings. Definte at least in a garage
two types. -INDIVIDUAL PIECE DRAWINGS (Shop Ticket): Piece drawings
are prepared to detail the internal reinforcement to be cast in
a particular unit. Also shown are embedded items and
connection assemblies.
-ASSEMBLY DRAWINGS: These drawings show special
embedments that are manufactured by the plant or a
supplier for use within a product.
Project samples should be used for Project samples should be used when required by the project
what project conditions? specifications and when special finishes are involved.
and Verified Answers 2025
Terms in this set (13)
A commitment to quality starts The commitment to quality begins with a company's top management.
where in the organization?
Minimum items to be addressed by the QSM are:
-Management commitment
-Definition of organization structure
-Management review of the QA program
-Plant facilities layout and definition
Each plant should have a written QA -Purchasing procedures for QC compliance
program. What is this program -Uniform methods for reporting, reviewing, and maintaining records
called and what are the minimum -identification of training needs
items to be -Control, calibration, and paintenance of necessary equipment
addressed by it. -Standards for shop drawings to ensure accuracy and uniform
interpretation of instructions for manufacturing handling
-Procedures for review and dissemination of project-specific
requirements to production and quality control personell.
Categories of shop drawings:
-ERECTION DRAWINGS: Show an overall layout of products for a
particular area.
May be a wall layout (elevation) for architerctural concrete
There are several categories of cladding panels or a plan layout for double-tee floor members
shop drawings. Definte at least in a garage
two types. -INDIVIDUAL PIECE DRAWINGS (Shop Ticket): Piece drawings
are prepared to detail the internal reinforcement to be cast in
a particular unit. Also shown are embedded items and
connection assemblies.
-ASSEMBLY DRAWINGS: These drawings show special
embedments that are manufactured by the plant or a
supplier for use within a product.
Project samples should be used for Project samples should be used when required by the project
what project conditions? specifications and when special finishes are involved.
