Coating Inspector Level 1 (21-40) Questions
with Correct Answers 2025
When performing tests for oil and grease using an ultra-
violet light, the NACE Inspector should be aware that: - CORRECT ANSWER -
Synthetic oil or grease may not be identified
To achieve consistently accurate results with ALL alt test equipment - CORRECT ANSWER -
wash your hands before sampling.
When holiday testing is required the Inspector is always required to enforce NACE SP 0188:
- CORRECT ANSWER -True
If the specifier does not identify a restriction level in accordance with SSPC PA 2, the defaul
t restriction level is: - CORRECT ANSWER -Level 3
Fine cracks in the surface of a coating that rarely reach the substrate are called -
CORRECT ANSWER -checking
It is good practice for the NACE Inspector to have instrument calibration certificates availabl
e: - CORRECT ANSWER -At all times
In a non-convertible coating the role of the primary solvent is to: - CORRECT ANSWER -
To control the evaporation rate
Removal of welds splatter is required: - CORRECT ANSWER -
When specifically identified in the owner's specification
with Correct Answers 2025
When performing tests for oil and grease using an ultra-
violet light, the NACE Inspector should be aware that: - CORRECT ANSWER -
Synthetic oil or grease may not be identified
To achieve consistently accurate results with ALL alt test equipment - CORRECT ANSWER -
wash your hands before sampling.
When holiday testing is required the Inspector is always required to enforce NACE SP 0188:
- CORRECT ANSWER -True
If the specifier does not identify a restriction level in accordance with SSPC PA 2, the defaul
t restriction level is: - CORRECT ANSWER -Level 3
Fine cracks in the surface of a coating that rarely reach the substrate are called -
CORRECT ANSWER -checking
It is good practice for the NACE Inspector to have instrument calibration certificates availabl
e: - CORRECT ANSWER -At all times
In a non-convertible coating the role of the primary solvent is to: - CORRECT ANSWER -
To control the evaporation rate
Removal of welds splatter is required: - CORRECT ANSWER -
When specifically identified in the owner's specification
