OSHA 30 Final Exam Review With 100%
Correct And Verified Answers
Hand tools are powered instruments, which can be very hazardous when improperly
used due to their power source. - Correct Answer-False
Which of the following is not a correct general precaution that should be followed by all
power tool users? - Correct Answer-Handle tools by the cord or hose
Safety guards must never be removed when a tool is being used. - Correct Answer-True
What is the main danger associated with pneumatic tools? - Correct Answer-Getting hit
by tool's attachment or fastener
PR
The operating control on hand-held power tools must be located at to minimize the
possibility of accidental operation, if such accidental operation would constitute a hazard
to employees. - Correct Answer-True
What requirements are necessary to protect an electric tool user from shock? - Correct
O
Answer-Both A and B
All portable, power-driven circular saws having a blade diameter greater than 3 in. must
FD
be equipped with guards above and below the base plate or shoe - Correct Answer-
False
An important safety precaution to remember when operating powder-actuated tool is: -
Correct Answer-Inspect it before use and determine that it is clean and that all moving
parts operate freely
O
Hydraulic jacks exposed to freezing temperatures must be kept warm with an internal
temperature lift. - Correct Answer-False
C
Who is responsible for the safe conditions of tools and equipment used in the
workplace? - Correct Answer-Employers
What does MSD stand for? - Correct Answer-musculoskeletal disorders
You should change your working position frequently by: - Correct Answer-All of the
above
regardless of how good your working posture is, working in the same posture or sitting
for prolonged periods is not healthy. - Correct Answer-True
, Hazard prevention and control includes - Correct Answer-Implementing administrative
and engineering controls
Pushing carries a greater risk of strain and injury. - Correct Answer-False
Uncontrollable shivering, loss of coordination, and slurred speech are symptoms of
what? - Correct Answer-Hypothermia
Types of heat illness include? - Correct Answer-All of the above
Implementing an ergonomic process is effective in reducing the risk of developing
MSDs in high-risk industries. - Correct Answer-True
When does Working Restriction Protection end? - Correct Answer-The employee is able
to return to his or her regular job or a new position.
PR
Reporting symptoms of MSD early does not help in stopping MSD. - Correct Answer-
False
Industrial hygiene is the science of keeping yourself favorable to health, free from dirt,
bacteria. - Correct Answer-False
O
Gases are formless fluids that expand to occupy the space or enclosure the are
contained in. - Correct Answer-True
FD
Biological hazards are - Correct Answer-Viruses
Which of the following is NOT a role of industrial hygienists? - Correct Answer-Training
employees on the recognition of hazards
O
Noise can be reduced by: - Correct Answer-All of the above
Engineering controls are the last strategy of control an employer should use for job
C
hazards. - Correct Answer-False
Effective personal protective equipment must be? - Correct Answer-Regularly
maintained
Employees who wear personal protective equipment do not need safety and health
training. - Correct Answer-False
During emergencies, hazards appear that normally are not found in the workplace. -
Correct Answer-True
Work practice controls include the company's general workplace rules and other
operation-specific rules. - Correct Answer-True
Correct And Verified Answers
Hand tools are powered instruments, which can be very hazardous when improperly
used due to their power source. - Correct Answer-False
Which of the following is not a correct general precaution that should be followed by all
power tool users? - Correct Answer-Handle tools by the cord or hose
Safety guards must never be removed when a tool is being used. - Correct Answer-True
What is the main danger associated with pneumatic tools? - Correct Answer-Getting hit
by tool's attachment or fastener
PR
The operating control on hand-held power tools must be located at to minimize the
possibility of accidental operation, if such accidental operation would constitute a hazard
to employees. - Correct Answer-True
What requirements are necessary to protect an electric tool user from shock? - Correct
O
Answer-Both A and B
All portable, power-driven circular saws having a blade diameter greater than 3 in. must
FD
be equipped with guards above and below the base plate or shoe - Correct Answer-
False
An important safety precaution to remember when operating powder-actuated tool is: -
Correct Answer-Inspect it before use and determine that it is clean and that all moving
parts operate freely
O
Hydraulic jacks exposed to freezing temperatures must be kept warm with an internal
temperature lift. - Correct Answer-False
C
Who is responsible for the safe conditions of tools and equipment used in the
workplace? - Correct Answer-Employers
What does MSD stand for? - Correct Answer-musculoskeletal disorders
You should change your working position frequently by: - Correct Answer-All of the
above
regardless of how good your working posture is, working in the same posture or sitting
for prolonged periods is not healthy. - Correct Answer-True
, Hazard prevention and control includes - Correct Answer-Implementing administrative
and engineering controls
Pushing carries a greater risk of strain and injury. - Correct Answer-False
Uncontrollable shivering, loss of coordination, and slurred speech are symptoms of
what? - Correct Answer-Hypothermia
Types of heat illness include? - Correct Answer-All of the above
Implementing an ergonomic process is effective in reducing the risk of developing
MSDs in high-risk industries. - Correct Answer-True
When does Working Restriction Protection end? - Correct Answer-The employee is able
to return to his or her regular job or a new position.
PR
Reporting symptoms of MSD early does not help in stopping MSD. - Correct Answer-
False
Industrial hygiene is the science of keeping yourself favorable to health, free from dirt,
bacteria. - Correct Answer-False
O
Gases are formless fluids that expand to occupy the space or enclosure the are
contained in. - Correct Answer-True
FD
Biological hazards are - Correct Answer-Viruses
Which of the following is NOT a role of industrial hygienists? - Correct Answer-Training
employees on the recognition of hazards
O
Noise can be reduced by: - Correct Answer-All of the above
Engineering controls are the last strategy of control an employer should use for job
C
hazards. - Correct Answer-False
Effective personal protective equipment must be? - Correct Answer-Regularly
maintained
Employees who wear personal protective equipment do not need safety and health
training. - Correct Answer-False
During emergencies, hazards appear that normally are not found in the workplace. -
Correct Answer-True
Work practice controls include the company's general workplace rules and other
operation-specific rules. - Correct Answer-True
