IEC YEAR 2 EXAM QUESTIONS WITH VERIFIED
ANSWERS CURRENTLY TESTED AND GRADED A+
NEW UPDATED EXAM
Which type of anchors require drilling?
Select one:
a. compressed gas anchors
b. masonry anchors
c. cast-in concrete anchors
d. concrete anchors --CORRECT ANSWER--d.
concrete anchors
Which type of anchors use pressure to force the anchor in place?
Select one:
a.compressed gas anchors
b.masonry anchors
c.cast-in concrete anchors
d.concrete anchors --CORRECT ANSWER--a.
compressed gas anchors
Electrical penetrations can be sealed with?
Select one:
a.caulk
b.grout
,c.foam
d.all of these --CORRECT ANSWER--d.
all of these
What is important when sealing a penetration in a fire rated wall?
Select one:
a.color of sealant
b.fire rating of sealant
c.diameter of penetration
d.none of these --CORRECT ANSWER--b.
fire rating of sealant
Every person working on any ___ system needs to be familiar with the NFPA 70E.
Select one:
a.electrical
b.mechanical
c.computer
d.solar --CORRECT ANSWER--a.
electrical
The ___ plan shows the compass direction of the building.
Select one:
a. floor
,b. elevation
c. compass
d. plot --CORRECT ANSWER--d.
plot
The project delivery method where the owner works with the architect/engineers directly at
project start is ___.
Select one:
a. design-bid/build
b. design-build
c. time and material
d. build-design --CORRECT ANSWER--a.
design-bid/build
RFP typically means ___.
Select one:
a. reinforced partition
b. rounded furniture post
c. request from plumber
d. request for pricing/proposal --CORRECT ANSWER--d.
request for pricing/proposal
Costs for additional items not covered in the original construction contract are authorized by
___.
, Select one:
a.change orders
b.word of mouth
c.specifications
d.contract appendices --CORRECT ANSWER--a.
change orders
CAD is the acronym for ___.
Select one:
a.computer architecture data
b.computer-aided drafting
c.costly architecture design
d.constant attention to detail --CORRECT ANSWER--b.
computer-aided drafting
Pages within a set of prints are numbered according to the type and convention. What is an
example of a naming convention found within a set of prints?
Select one:
a.fire protection
b.raceways
c.framing
d.trim --CORRECT ANSWER--a.
fire protection
BIM is the acronym for ___.
ANSWERS CURRENTLY TESTED AND GRADED A+
NEW UPDATED EXAM
Which type of anchors require drilling?
Select one:
a. compressed gas anchors
b. masonry anchors
c. cast-in concrete anchors
d. concrete anchors --CORRECT ANSWER--d.
concrete anchors
Which type of anchors use pressure to force the anchor in place?
Select one:
a.compressed gas anchors
b.masonry anchors
c.cast-in concrete anchors
d.concrete anchors --CORRECT ANSWER--a.
compressed gas anchors
Electrical penetrations can be sealed with?
Select one:
a.caulk
b.grout
,c.foam
d.all of these --CORRECT ANSWER--d.
all of these
What is important when sealing a penetration in a fire rated wall?
Select one:
a.color of sealant
b.fire rating of sealant
c.diameter of penetration
d.none of these --CORRECT ANSWER--b.
fire rating of sealant
Every person working on any ___ system needs to be familiar with the NFPA 70E.
Select one:
a.electrical
b.mechanical
c.computer
d.solar --CORRECT ANSWER--a.
electrical
The ___ plan shows the compass direction of the building.
Select one:
a. floor
,b. elevation
c. compass
d. plot --CORRECT ANSWER--d.
plot
The project delivery method where the owner works with the architect/engineers directly at
project start is ___.
Select one:
a. design-bid/build
b. design-build
c. time and material
d. build-design --CORRECT ANSWER--a.
design-bid/build
RFP typically means ___.
Select one:
a. reinforced partition
b. rounded furniture post
c. request from plumber
d. request for pricing/proposal --CORRECT ANSWER--d.
request for pricing/proposal
Costs for additional items not covered in the original construction contract are authorized by
___.
, Select one:
a.change orders
b.word of mouth
c.specifications
d.contract appendices --CORRECT ANSWER--a.
change orders
CAD is the acronym for ___.
Select one:
a.computer architecture data
b.computer-aided drafting
c.costly architecture design
d.constant attention to detail --CORRECT ANSWER--b.
computer-aided drafting
Pages within a set of prints are numbered according to the type and convention. What is an
example of a naming convention found within a set of prints?
Select one:
a.fire protection
b.raceways
c.framing
d.trim --CORRECT ANSWER--a.
fire protection
BIM is the acronym for ___.
