Page | 1
BCTC INDUSTRIAL MAINTENANCE
TECHNOLOGY AMTEC (NOCTI MECHATRONIC)
REVIEW ACTUAL EXAM VERIFIED QUESTIONS
AND CORRECT ANSWERS| GUARANTEED
PASS| UPDATED 2026
If you inhale phenolic fumes what would happen to you? - Correct Answer-
Trouble breathing
A fire extinguisher should be used on an electrical fire. -
Correct Answer-Class C
What does OSHA stand for? - Correct Answer-Occupational Safety &
Health Administration
This type of drawing represents a three-dimensional object using several
two-dimensional views of the object. - Correct Answer-Orthographic
What are linear dimensions usually expressed in? - Correct Answer-
Decimal or Fractional Units
, Page | 2
What does a filled triangle represent in a fluid power diagram? - Correct
Answer-Hydraulic Flow
What can happen if bolts and nuts are not properly torqued? - Correct
Answer-They wear out quickly and can cause failure.
What safety practice is used to prevent equipment from being energized? -
Correct Answer-Lockout/Tagout
A Safety Data Sheet (SDS) provides information about first aid measures,
stability and reactivity, and ? - Correct Answer-Handling and Storage
Which of the following is not true of a title block? - Correct Answer-Format
is the same from company to company.
A NFPA 70E is a regulation that provides guidelines and details for
? - Correct Answer-Electrical safety
GFCI devices are used for what purpose? - Correct Answer-To prevent a
person from being electrocuted.
, Page | 3
A person with serious electrical injury should be moved only when
. - Correct Answer-They are in immediate danger
What must be provided by chemical manufacturers, distributors, and
importers to anyone who will work with these potentially dangerous
materials? - Correct Answer-Safety Data Sheet (SDS).
You come across a fellow employee who is being electrocuted by
becoming attached to a live electrical circuit, what is the first thing you
should do? - Correct Answer-Shut off the circuit.
What would slippery floors and cluttered walkways be considered in the
workplace? - Correct Answer-Physical hazards.
What tool is used to measure the turning force when tightening a fastener?
- Correct Answer-Torque Wrench
When working on an electrical, fluid power, or mechanical system a
procedure should be performed to lock out the energy. - Correct Answer-
LOTO
BCTC INDUSTRIAL MAINTENANCE
TECHNOLOGY AMTEC (NOCTI MECHATRONIC)
REVIEW ACTUAL EXAM VERIFIED QUESTIONS
AND CORRECT ANSWERS| GUARANTEED
PASS| UPDATED 2026
If you inhale phenolic fumes what would happen to you? - Correct Answer-
Trouble breathing
A fire extinguisher should be used on an electrical fire. -
Correct Answer-Class C
What does OSHA stand for? - Correct Answer-Occupational Safety &
Health Administration
This type of drawing represents a three-dimensional object using several
two-dimensional views of the object. - Correct Answer-Orthographic
What are linear dimensions usually expressed in? - Correct Answer-
Decimal or Fractional Units
, Page | 2
What does a filled triangle represent in a fluid power diagram? - Correct
Answer-Hydraulic Flow
What can happen if bolts and nuts are not properly torqued? - Correct
Answer-They wear out quickly and can cause failure.
What safety practice is used to prevent equipment from being energized? -
Correct Answer-Lockout/Tagout
A Safety Data Sheet (SDS) provides information about first aid measures,
stability and reactivity, and ? - Correct Answer-Handling and Storage
Which of the following is not true of a title block? - Correct Answer-Format
is the same from company to company.
A NFPA 70E is a regulation that provides guidelines and details for
? - Correct Answer-Electrical safety
GFCI devices are used for what purpose? - Correct Answer-To prevent a
person from being electrocuted.
, Page | 3
A person with serious electrical injury should be moved only when
. - Correct Answer-They are in immediate danger
What must be provided by chemical manufacturers, distributors, and
importers to anyone who will work with these potentially dangerous
materials? - Correct Answer-Safety Data Sheet (SDS).
You come across a fellow employee who is being electrocuted by
becoming attached to a live electrical circuit, what is the first thing you
should do? - Correct Answer-Shut off the circuit.
What would slippery floors and cluttered walkways be considered in the
workplace? - Correct Answer-Physical hazards.
What tool is used to measure the turning force when tightening a fastener?
- Correct Answer-Torque Wrench
When working on an electrical, fluid power, or mechanical system a
procedure should be performed to lock out the energy. - Correct Answer-
LOTO
