MKC SWE Study Guide 2025 NEWEST EXAM
COMPLETE 1450 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
ALREADY GRADED A+ BRAND NEW!!
. - CORRECT ANSWER: ...
"STAINS" ON PLUNGERS MAY BE REMOVED BY THE USE OF A LIMITED
QUANTITY OF - CORRECT ANSWER: JEWELERS ROUGE ON A PIECE OF SOFT
TISSUE PAPER
• Completed inactive record sheets shall be retained for how long?
(Six months)
• Tag numbering shall start on _________ at tag number __________?
(01OCT/001)
• Equipment tag out procedures manual number?
(COMDTINST M9077.1)
Develop Engineering Department Preventive Maintenance Schedules
,Reference: Naval Engineering Manual (M9000.6E Chapter 081)
• List the three levels of Coast Guard Maintenance
(organizational, intermediate, depot)
• ___________________ maintenance is the performance of scheduled and
unscheduled tasks designed to restore equipment after failure has occurred.
(Corrective)
• CASREPS must be created in _________ from ________ to support management of
maintenance data.
(CMPlus/Corrective Maintenance Action (CMA))
• CMDIS stands for:
(Configuration management data interchange standard)
• RCM stands for:
(Reliability centered maintenance)
• For - CORRECT ANSWER: ...
• Crankweb deflection readings need only be taken after each major overhaul, unless
damage is suspected as a result of grounding or collision.
,• Crankweb deflections should also be taken after dry dock or haul out of the cutter
• Crankweb deflection readings should only be taken with the cutter waterborne
• Crankshaft deflection readings are to be recorded in the machinery history and
reported in the Cutter Engineering Report for engines with crank journals of 4 inches or
more.
• Method for checking crankshaft alignment is using the crankshaft deflection gage.
o Specially adapted dial indicator which fits between the crankwebs and directly reads
the flexing motion of the webs as the crankshaft is slowly turned.
• Center punch marks shall be small and made with a very sharp punch. A needle valve
from a scrapped fuel injector is a good tool.
• Crankweb deflection readings are from 5 places.
• The most important - CORRECT ANSWER: ...
100. The MPU-23 CARD exhibits what color lights on the panel when operating
normally? - CORRECT ANSWER: Green, Yellow, Yellow
101. When an HVAC secures via the low pressure switch, this is an indicator of? -
CORRECT ANSWER: Low pressure on the low side
1STRIP line on a CASREP provides what? - CORRECT ANSWER: Milstrip info for parts
in 1PARTS- COMDINST M3501.3E Chapter 3, pg. 3-3
70. What coolant is used in a keel cooler? - CORRECT ANSWER: Antifreeze- NEM
233-6
78. With a floating charge, the charger monitors what? - CORRECT ANSWER: Voltage
79. What is the minimum CASREP priority assigned by an underway unit? - CORRECT
ANSWER: Priority- COMDINST M3501.3E Chapter 2 pg. 2-1 A.
, 80. Where is Triple Guard grease used on a Honda 225 outboard drive shaft? -
CORRECT ANSWER: The drive shaft splines- TP3930 Shop Manual pg. 12-4
A "C" ON THE HEAD OF A BOLT INDICATES WHAT? - CORRECT ANSWER:
CORROSION RESISTANT
A "C" ON THE HEAD OF A BOLT INDICATES WHAT? - CORRECT ANSWER:
CORROSION RESISTANT
A 10 PSI RISE IN A/C SYSTEM AFTER EVACUATION IS AN INDICATION OF? -
CORRECT ANSWER: LEAK
A BRIGHT SPOT FOUND ON EACH END OF A BROKEN RING INDICATES? -
CORRECT ANSWER: INSUFFICIENT GAP CLEARANCE
A BRIGHT SPOT FOUND ON EACH END OF A BROKEN RING INDICATES? -
CORRECT ANSWER: INSUFFICIENT GAP CLEARANCE
A casualty report should be submitted for any equipment deficiency that cannot be
repaired with in _____ hours and affects the unit's ______________. - CORRECT
ANSWER: (48; primary and secondary missions)
A CENTRIFUGAL PURIFIER CAN BE OPERATED AS EITHER A - CORRECT
ANSWER: SEPERATOR OR CLARIFIER
A CENTRIFUGAL PURIFIER CAN BE OPERATED AS EITHER A - CORRECT
ANSWER: SEPERATOR OR CLARIFIER
A CHANGE OF STATE FROM A SOLID TO A VAPOR WITHOUT PASSING THROUGH
THE LIQUID STATE IS CALLED - CORRECT ANSWER: SUBLIMATION
COMPLETE 1450 QUESTIONS AND CORRECT
DETAILED ANSWERS (VERIFIED ANSWERS)
ALREADY GRADED A+ BRAND NEW!!
. - CORRECT ANSWER: ...
"STAINS" ON PLUNGERS MAY BE REMOVED BY THE USE OF A LIMITED
QUANTITY OF - CORRECT ANSWER: JEWELERS ROUGE ON A PIECE OF SOFT
TISSUE PAPER
• Completed inactive record sheets shall be retained for how long?
(Six months)
• Tag numbering shall start on _________ at tag number __________?
(01OCT/001)
• Equipment tag out procedures manual number?
(COMDTINST M9077.1)
Develop Engineering Department Preventive Maintenance Schedules
,Reference: Naval Engineering Manual (M9000.6E Chapter 081)
• List the three levels of Coast Guard Maintenance
(organizational, intermediate, depot)
• ___________________ maintenance is the performance of scheduled and
unscheduled tasks designed to restore equipment after failure has occurred.
(Corrective)
• CASREPS must be created in _________ from ________ to support management of
maintenance data.
(CMPlus/Corrective Maintenance Action (CMA))
• CMDIS stands for:
(Configuration management data interchange standard)
• RCM stands for:
(Reliability centered maintenance)
• For - CORRECT ANSWER: ...
• Crankweb deflection readings need only be taken after each major overhaul, unless
damage is suspected as a result of grounding or collision.
,• Crankweb deflections should also be taken after dry dock or haul out of the cutter
• Crankweb deflection readings should only be taken with the cutter waterborne
• Crankshaft deflection readings are to be recorded in the machinery history and
reported in the Cutter Engineering Report for engines with crank journals of 4 inches or
more.
• Method for checking crankshaft alignment is using the crankshaft deflection gage.
o Specially adapted dial indicator which fits between the crankwebs and directly reads
the flexing motion of the webs as the crankshaft is slowly turned.
• Center punch marks shall be small and made with a very sharp punch. A needle valve
from a scrapped fuel injector is a good tool.
• Crankweb deflection readings are from 5 places.
• The most important - CORRECT ANSWER: ...
100. The MPU-23 CARD exhibits what color lights on the panel when operating
normally? - CORRECT ANSWER: Green, Yellow, Yellow
101. When an HVAC secures via the low pressure switch, this is an indicator of? -
CORRECT ANSWER: Low pressure on the low side
1STRIP line on a CASREP provides what? - CORRECT ANSWER: Milstrip info for parts
in 1PARTS- COMDINST M3501.3E Chapter 3, pg. 3-3
70. What coolant is used in a keel cooler? - CORRECT ANSWER: Antifreeze- NEM
233-6
78. With a floating charge, the charger monitors what? - CORRECT ANSWER: Voltage
79. What is the minimum CASREP priority assigned by an underway unit? - CORRECT
ANSWER: Priority- COMDINST M3501.3E Chapter 2 pg. 2-1 A.
, 80. Where is Triple Guard grease used on a Honda 225 outboard drive shaft? -
CORRECT ANSWER: The drive shaft splines- TP3930 Shop Manual pg. 12-4
A "C" ON THE HEAD OF A BOLT INDICATES WHAT? - CORRECT ANSWER:
CORROSION RESISTANT
A "C" ON THE HEAD OF A BOLT INDICATES WHAT? - CORRECT ANSWER:
CORROSION RESISTANT
A 10 PSI RISE IN A/C SYSTEM AFTER EVACUATION IS AN INDICATION OF? -
CORRECT ANSWER: LEAK
A BRIGHT SPOT FOUND ON EACH END OF A BROKEN RING INDICATES? -
CORRECT ANSWER: INSUFFICIENT GAP CLEARANCE
A BRIGHT SPOT FOUND ON EACH END OF A BROKEN RING INDICATES? -
CORRECT ANSWER: INSUFFICIENT GAP CLEARANCE
A casualty report should be submitted for any equipment deficiency that cannot be
repaired with in _____ hours and affects the unit's ______________. - CORRECT
ANSWER: (48; primary and secondary missions)
A CENTRIFUGAL PURIFIER CAN BE OPERATED AS EITHER A - CORRECT
ANSWER: SEPERATOR OR CLARIFIER
A CENTRIFUGAL PURIFIER CAN BE OPERATED AS EITHER A - CORRECT
ANSWER: SEPERATOR OR CLARIFIER
A CHANGE OF STATE FROM A SOLID TO A VAPOR WITHOUT PASSING THROUGH
THE LIQUID STATE IS CALLED - CORRECT ANSWER: SUBLIMATION
