Florida Glass & Glazing Contractor
Licensing Exam 2025 – 120 Practice
Questions & Correct Answers | DBPR
Specialty Contractor Prep | FBC Safety
Glazing, Storefronts, Curtainwall, IG
Units, Code Compliance | 2025/2026| Newly
updated| instant Download !
1. What is the primary responsibility of a licensed glass and glazing contractor in
Florida?
A. Selling glass products only
B. Installing, repairing, and maintaining glass in compliance with state
regulations (correct answer)
C. Designing windows for clients
D. Manufacturing glass
Rationale:
A licensed contractor is legally responsible for proper installation, maintenance, and
repair of glazing systems according to state and local codes.
2. Which Florida agency regulates glass and glazing contractors?
A. Department of Transportation
B. Florida Department of Business & Professional Regulation (DBPR) (correct
answer)
C. Department of Environmental Protection
D. OSHA
Rationale:
The DBPR oversees licensing, compliance, and disciplinary actions for contractors in
Florida, including glass and glazing.
3. What is required before beginning a glazing project?
A. Purchase insurance only
B. Obtain the proper permit and follow building codes (correct answer)
C. Hire an inspector afterward
D. Start without permits
,Rationale:
Permits ensure work is legal, meets safety codes, and is subject to inspection for
compliance.
4. What is the minimum liability insurance a Florida glass and glazing
contractor must carry?
A. $10,000
B. $50,000
C. $100,000 (correct answer)
D. $500,000
Rationale:
DBPR regulations require contractors to maintain sufficient liability coverage to
protect clients and themselves against property damage or injury claims.
5. What is the purpose of a sealant in glazing systems?
A. Decoration
B. Insulation only
C. Prevent air and water infiltration (correct answer)
D. Structural support only
Rationale:
Sealants ensure glass systems are weather-tight and prevent leaks, while maintaining
energy efficiency and safety.
6. Which type of glass is commonly used for safety in doors and windows?
A. Annealed glass
B. Plate glass
C. Tempered or laminated glass (correct answer)
D. Float glass
Rationale:
Tempered and laminated glass reduce the risk of injury if broken, complying with
safety codes for residential and commercial applications.
7. Which tool is essential for accurately measuring and cutting glass?
A. Screwdriver
B. Hammer
C. Glass cutter and measuring tape (correct answer)
D. Pliers
, Rationale:
Accurate measurement and cutting ensure proper fit and reduce waste or damage
during installation.
8. What is the maximum size for a single pane of annealed glass before it must be
tempered according to Florida building codes?
A. 24” x 36”
B. 36” x 48”
C. 32” x 64” (correct answer)
D. 48” x 72”
Rationale:
Large panes of annealed glass must be tempered to prevent dangerous breakage in
case of impact.
9. Which safety equipment is required for glazing work?
A. Gloves only
B. Hard hat only
C. Gloves, safety glasses, and protective clothing (correct answer)
D. Respirator only
Rationale:
Proper PPE protects workers from cuts, chemical exposure, and debris during
installation or repair.
10. What is a common cause of sealant failure in glazing systems?
A. Proper mixing
B. UV exposure, moisture, and improper application (correct answer)
C. Using the wrong color
D. Excess ventilation
Rationale:
Environmental exposure and incorrect application can cause sealants to degrade,
leading to leaks and reduced system lifespan.
11. What must a Florida glass and glazing contractor provide before starting
work?
A. Personal tools
B. Written contract specifying materials, labor, and timeline (correct answer)
C. Verbal agreement only
D. Insurance only
Licensing Exam 2025 – 120 Practice
Questions & Correct Answers | DBPR
Specialty Contractor Prep | FBC Safety
Glazing, Storefronts, Curtainwall, IG
Units, Code Compliance | 2025/2026| Newly
updated| instant Download !
1. What is the primary responsibility of a licensed glass and glazing contractor in
Florida?
A. Selling glass products only
B. Installing, repairing, and maintaining glass in compliance with state
regulations (correct answer)
C. Designing windows for clients
D. Manufacturing glass
Rationale:
A licensed contractor is legally responsible for proper installation, maintenance, and
repair of glazing systems according to state and local codes.
2. Which Florida agency regulates glass and glazing contractors?
A. Department of Transportation
B. Florida Department of Business & Professional Regulation (DBPR) (correct
answer)
C. Department of Environmental Protection
D. OSHA
Rationale:
The DBPR oversees licensing, compliance, and disciplinary actions for contractors in
Florida, including glass and glazing.
3. What is required before beginning a glazing project?
A. Purchase insurance only
B. Obtain the proper permit and follow building codes (correct answer)
C. Hire an inspector afterward
D. Start without permits
,Rationale:
Permits ensure work is legal, meets safety codes, and is subject to inspection for
compliance.
4. What is the minimum liability insurance a Florida glass and glazing
contractor must carry?
A. $10,000
B. $50,000
C. $100,000 (correct answer)
D. $500,000
Rationale:
DBPR regulations require contractors to maintain sufficient liability coverage to
protect clients and themselves against property damage or injury claims.
5. What is the purpose of a sealant in glazing systems?
A. Decoration
B. Insulation only
C. Prevent air and water infiltration (correct answer)
D. Structural support only
Rationale:
Sealants ensure glass systems are weather-tight and prevent leaks, while maintaining
energy efficiency and safety.
6. Which type of glass is commonly used for safety in doors and windows?
A. Annealed glass
B. Plate glass
C. Tempered or laminated glass (correct answer)
D. Float glass
Rationale:
Tempered and laminated glass reduce the risk of injury if broken, complying with
safety codes for residential and commercial applications.
7. Which tool is essential for accurately measuring and cutting glass?
A. Screwdriver
B. Hammer
C. Glass cutter and measuring tape (correct answer)
D. Pliers
, Rationale:
Accurate measurement and cutting ensure proper fit and reduce waste or damage
during installation.
8. What is the maximum size for a single pane of annealed glass before it must be
tempered according to Florida building codes?
A. 24” x 36”
B. 36” x 48”
C. 32” x 64” (correct answer)
D. 48” x 72”
Rationale:
Large panes of annealed glass must be tempered to prevent dangerous breakage in
case of impact.
9. Which safety equipment is required for glazing work?
A. Gloves only
B. Hard hat only
C. Gloves, safety glasses, and protective clothing (correct answer)
D. Respirator only
Rationale:
Proper PPE protects workers from cuts, chemical exposure, and debris during
installation or repair.
10. What is a common cause of sealant failure in glazing systems?
A. Proper mixing
B. UV exposure, moisture, and improper application (correct answer)
C. Using the wrong color
D. Excess ventilation
Rationale:
Environmental exposure and incorrect application can cause sealants to degrade,
leading to leaks and reduced system lifespan.
11. What must a Florida glass and glazing contractor provide before starting
work?
A. Personal tools
B. Written contract specifying materials, labor, and timeline (correct answer)
C. Verbal agreement only
D. Insurance only
