ACG CxA Exam Updated Questions and
CORRECT Answers
1. Owner
2. End user
3. architect
4. electrical engineer
5. mechanical engineer
6. commissioning authority
7. controls contractor
8. mechanical contractor
9. electrical contractor
10. sheet metal contractor
11. TAB agency
12. General or construction manager
13. owners O&M staff - CORRECT ANSWER Identify typical team member of the Cx
Team.
1. commissioning starts at the inception of a building project during the pre-design phase, and
continues through the post-acceptance phase.
2. provides an opportunity to cultivate a quality management focus among all design and
construction team members as they become involved with the project - CORRECT
ANSWER Comprehensive Commissioning
Chapter 5 - CORRECT ANSWER Which Chapter of the ACG guideline identifies
detailed methodology for Comprehensive HVAC Commissioning?
Pre-design
Design
Construction
, Acceptance
Post Acceptance - CORRECT ANSWER What are the Comprehensive Commissioning
phases?
1. Commissioning established as integral part of project
2. The owner selects the commissioning authority
3. Develop the scope of commissioning
4. Commissioning authority reviews design intent document - CORRECT
ANSWER Comprehensive Commissioning: Pre-design phase
1. Review design to ensure it accommodates commissioning
2. Write commissioning specifications defining contractor
responsibilities
3. Commissioning authority writes the commissioning plan
4. Establish the project schedule - CORRECT ANSWER Comprehensive
Commissioning Design phase
1. Commissioning authority reviews contractor submittals
2. Commissioning authority updates commissioning plan
3. Commissioning process is coordinated—through project
schedule, commissioning plan and commissioning plan
and commissioning meetings
4. Carry out and document system verification checks
5. Carry out the document equipment and system start-ups
6. TAB agency completes and documents TAB work - CORRECT
ANSWER Comprehensive Commissioning Construction phase
1. Carry out FPTs on all HVAC systems
2. Train the O&M staff for effective, ongoing operations and maintenance of all systems
CORRECT Answers
1. Owner
2. End user
3. architect
4. electrical engineer
5. mechanical engineer
6. commissioning authority
7. controls contractor
8. mechanical contractor
9. electrical contractor
10. sheet metal contractor
11. TAB agency
12. General or construction manager
13. owners O&M staff - CORRECT ANSWER Identify typical team member of the Cx
Team.
1. commissioning starts at the inception of a building project during the pre-design phase, and
continues through the post-acceptance phase.
2. provides an opportunity to cultivate a quality management focus among all design and
construction team members as they become involved with the project - CORRECT
ANSWER Comprehensive Commissioning
Chapter 5 - CORRECT ANSWER Which Chapter of the ACG guideline identifies
detailed methodology for Comprehensive HVAC Commissioning?
Pre-design
Design
Construction
, Acceptance
Post Acceptance - CORRECT ANSWER What are the Comprehensive Commissioning
phases?
1. Commissioning established as integral part of project
2. The owner selects the commissioning authority
3. Develop the scope of commissioning
4. Commissioning authority reviews design intent document - CORRECT
ANSWER Comprehensive Commissioning: Pre-design phase
1. Review design to ensure it accommodates commissioning
2. Write commissioning specifications defining contractor
responsibilities
3. Commissioning authority writes the commissioning plan
4. Establish the project schedule - CORRECT ANSWER Comprehensive
Commissioning Design phase
1. Commissioning authority reviews contractor submittals
2. Commissioning authority updates commissioning plan
3. Commissioning process is coordinated—through project
schedule, commissioning plan and commissioning plan
and commissioning meetings
4. Carry out and document system verification checks
5. Carry out the document equipment and system start-ups
6. TAB agency completes and documents TAB work - CORRECT
ANSWER Comprehensive Commissioning Construction phase
1. Carry out FPTs on all HVAC systems
2. Train the O&M staff for effective, ongoing operations and maintenance of all systems
