PRO BOARD HAZMAT TECH ACTUAL EXAM
2026 QUESTIONS WITH SOLUTIONS GRADED
A+
◉ What is the class designation for DOT111A60ALW1. Answer:
DOT111
◉ What is the difference between radioactive type B & C? Answer:
Type of transport and requirements
◉ This radioactive packaging Carries small quantities of radioactive
material with higher concentrations of radioactivity than those shipped
in industrial packaging. Answer: Type A
◉ What are the 5 types of radioactive packaging? Answer: Excepted,
Type A, B, C, and industrial
◉ A device that is introduced in a pipeline to separate multiple products
and to clean and test the pipeline is known as a. Answer: Pig
◉ This document should contain a list of items learned through
managing the incident and recommendations for improvement. Answer:
Lessons learned
,◉ A common leak for a 55-gallon drum would be. Answer: Bung
◉ What is the approximate angle needed to accomplish the rolling -
slide in method of overpacking a drum? Answer: 35°
◉ Appendix A of the OSHA 1910.120 standard outlines two non-
mandatory test methods for evaluating the integrity of totally
encapsulating chemical suits. Air pressure test and. Answer: Ammonia
test
◉ When working in PPE, emergency procedures must be established.
Answer: Loss of communication
◉ Chemical permeation is a three-step process involving which of the
following? Answer: Adsorption
◉ The _______ value is the maximum level to which a healthy
worker can be exposed for 30 minutes and escape without suffering
irreversible health effects or impairment. Answer: IDLH
◉ What is one of the most common references used by HazMat
technicians? Answer: ERG
, ◉ This detection instrument is based on collection of scattered light and
is used for a variety of applications involving solid, liquid and gas
samples. Answer: Ramen spectroscopy
◉ When using pH paper, readings more than _____ and less than _____
should be approached with caution. Answer: 12.5 and 2
◉ This is the minimum level REQUIRED PPE for an unknow or IDLH
atmosphere. Answer: Level B
◉ This is the minimum level RECOMMENDED PPE for an unknow or
IDLH atmosphere. Answer: Level A
◉ This monitoring instrument is sometime referred to as organic vapor
analyzers, detects many hydrocarbons and hydrocarbons derivatives.
Answer: FID
◉ What are the specific tasks that state how the response objectives will
be achieved? Answer: Response options
◉ What is the maximum pressure for an MC-338? Answer: 500 PSI
◉ A survey device that primarily measures organic gases and vapors
including volatile organic compounds, some inorganic compounds and
vapors is. Answer: PID
2026 QUESTIONS WITH SOLUTIONS GRADED
A+
◉ What is the class designation for DOT111A60ALW1. Answer:
DOT111
◉ What is the difference between radioactive type B & C? Answer:
Type of transport and requirements
◉ This radioactive packaging Carries small quantities of radioactive
material with higher concentrations of radioactivity than those shipped
in industrial packaging. Answer: Type A
◉ What are the 5 types of radioactive packaging? Answer: Excepted,
Type A, B, C, and industrial
◉ A device that is introduced in a pipeline to separate multiple products
and to clean and test the pipeline is known as a. Answer: Pig
◉ This document should contain a list of items learned through
managing the incident and recommendations for improvement. Answer:
Lessons learned
,◉ A common leak for a 55-gallon drum would be. Answer: Bung
◉ What is the approximate angle needed to accomplish the rolling -
slide in method of overpacking a drum? Answer: 35°
◉ Appendix A of the OSHA 1910.120 standard outlines two non-
mandatory test methods for evaluating the integrity of totally
encapsulating chemical suits. Air pressure test and. Answer: Ammonia
test
◉ When working in PPE, emergency procedures must be established.
Answer: Loss of communication
◉ Chemical permeation is a three-step process involving which of the
following? Answer: Adsorption
◉ The _______ value is the maximum level to which a healthy
worker can be exposed for 30 minutes and escape without suffering
irreversible health effects or impairment. Answer: IDLH
◉ What is one of the most common references used by HazMat
technicians? Answer: ERG
, ◉ This detection instrument is based on collection of scattered light and
is used for a variety of applications involving solid, liquid and gas
samples. Answer: Ramen spectroscopy
◉ When using pH paper, readings more than _____ and less than _____
should be approached with caution. Answer: 12.5 and 2
◉ This is the minimum level REQUIRED PPE for an unknow or IDLH
atmosphere. Answer: Level B
◉ This is the minimum level RECOMMENDED PPE for an unknow or
IDLH atmosphere. Answer: Level A
◉ This monitoring instrument is sometime referred to as organic vapor
analyzers, detects many hydrocarbons and hydrocarbons derivatives.
Answer: FID
◉ What are the specific tasks that state how the response objectives will
be achieved? Answer: Response options
◉ What is the maximum pressure for an MC-338? Answer: 500 PSI
◉ A survey device that primarily measures organic gases and vapors
including volatile organic compounds, some inorganic compounds and
vapors is. Answer: PID
