Manufacturing Exam – Questions & Accurate
Answers
Save
Practice questions for this set
Learn 1 /7 Study with Learn
-.002
Choose an answer
1 How often should you check the way oil and coolant level?
2 Match the following codes with the corresponding letters M06
You are boring a 1.000 diameter counterbore using G03? When the hole finishes and you
3
measure, the hole is .996. What is the correct diameter offset adjustment?
4 S.D.S (Safety Data Sheet) are sheets that...
Don't know?
Terms in this set (40)
, How often should you Every work shift
check the way oil and
coolant level?
What is the standard SFPM X 4(3.82) divided by the diameter = RPM
cutting speed formula to
calculate RPM?
What is a closed loop A closed loop system checks to make sure that the axis
system in CNC technology. distance sent is correct before it makes another move
You must cut a block 3.25 3.375
inches long and add 1/8 of
an inch for finish machining.
The length of the block you
must cut is?
S.D.S (Safety Data Sheet) Describe the chemicals and materials in the shop
are sheets that...
What is the measurement 2.322
on the dial caliper in this
picture?
The upper size limit for a .007
specified diameter is 1.751
inches. The measured
diameter is 1.758 inches.
How much oversize is the
diameter?
What direction do you The positive (+) X direction
crank the handle or move
the axis if you want to move
a tool from left to right in
relationship to the
workpiece?
How many 2-1/2-inch-long 6
bars can be cut from a rod
measuring a total of 15-3/4
inches?
A boxed dimension is tolerance
defined as a (feature
control frame, page 220)
Answers
Save
Practice questions for this set
Learn 1 /7 Study with Learn
-.002
Choose an answer
1 How often should you check the way oil and coolant level?
2 Match the following codes with the corresponding letters M06
You are boring a 1.000 diameter counterbore using G03? When the hole finishes and you
3
measure, the hole is .996. What is the correct diameter offset adjustment?
4 S.D.S (Safety Data Sheet) are sheets that...
Don't know?
Terms in this set (40)
, How often should you Every work shift
check the way oil and
coolant level?
What is the standard SFPM X 4(3.82) divided by the diameter = RPM
cutting speed formula to
calculate RPM?
What is a closed loop A closed loop system checks to make sure that the axis
system in CNC technology. distance sent is correct before it makes another move
You must cut a block 3.25 3.375
inches long and add 1/8 of
an inch for finish machining.
The length of the block you
must cut is?
S.D.S (Safety Data Sheet) Describe the chemicals and materials in the shop
are sheets that...
What is the measurement 2.322
on the dial caliper in this
picture?
The upper size limit for a .007
specified diameter is 1.751
inches. The measured
diameter is 1.758 inches.
How much oversize is the
diameter?
What direction do you The positive (+) X direction
crank the handle or move
the axis if you want to move
a tool from left to right in
relationship to the
workpiece?
How many 2-1/2-inch-long 6
bars can be cut from a rod
measuring a total of 15-3/4
inches?
A boxed dimension is tolerance
defined as a (feature
control frame, page 220)
