CNC NIMS Exam – Accurate Answers To All
Questions
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Use the MDI mode to command the turret to Index by using program like
commands.
Choose an answer
If you want to move a tool from Right
to Left toward the workpiece, what Match the following codes with the
1 2
direction do you crank the handle or corresponding letters.___G28
move the axis?
You want to index the turret to tool #6.
What Mode switch position allows you However, the machine has no manual
3 4
to move the machine axes manually? buttons or switches to allow turret
indexing. What do you do?
Don't know?
Terms in this set (65)
, If you want to move a tool Negative (-)
from Right to Left toward
the workpiece, what
direction do you crank the
handle or move the axis?
Match the following codes Program end/ rewing
with the corresponding
letters.___M30
A boxed dimension is Basic
defined as a_______.
As an CNC operator in a As you enter the manufacturing environment
machining lab, when should
you wear safety Glasses?
What Mode switch position Jog
allows you to move the
machine axes manually?
Line N29 (facing in X) X0
If you are standing in front Up and down (in and out)
of a CNC Turning Center
slant bed, what direction
does the Z axis travel.
Line N14 (Arc, Pos 4-5) G02 X-.063 Z.250 R-.125
You are boring a hole with subtract -.002
a boring bar and the hole
has a +.001 tolerance. Since
you don't want to machine
it out of tolerance on the
first part and scrap it, you
might go to the Tool offset
and temporarily alter it.
What direction would you
go in X?
Questions
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Use the MDI mode to command the turret to Index by using program like
commands.
Choose an answer
If you want to move a tool from Right
to Left toward the workpiece, what Match the following codes with the
1 2
direction do you crank the handle or corresponding letters.___G28
move the axis?
You want to index the turret to tool #6.
What Mode switch position allows you However, the machine has no manual
3 4
to move the machine axes manually? buttons or switches to allow turret
indexing. What do you do?
Don't know?
Terms in this set (65)
, If you want to move a tool Negative (-)
from Right to Left toward
the workpiece, what
direction do you crank the
handle or move the axis?
Match the following codes Program end/ rewing
with the corresponding
letters.___M30
A boxed dimension is Basic
defined as a_______.
As an CNC operator in a As you enter the manufacturing environment
machining lab, when should
you wear safety Glasses?
What Mode switch position Jog
allows you to move the
machine axes manually?
Line N29 (facing in X) X0
If you are standing in front Up and down (in and out)
of a CNC Turning Center
slant bed, what direction
does the Z axis travel.
Line N14 (Arc, Pos 4-5) G02 X-.063 Z.250 R-.125
You are boring a hole with subtract -.002
a boring bar and the hole
has a +.001 tolerance. Since
you don't want to machine
it out of tolerance on the
first part and scrap it, you
might go to the Tool offset
and temporarily alter it.
What direction would you
go in X?
