WITH CORRECT ANSWERS 2025/2026
A simple rope-and-pulley system called a is used to lift loads. CORRECT
ANSWER block & tackle
, a type of rigging hardware, are available in three basic designs: unshouldered,
shouldered, and swivel. CORRECT ANSWER eyebolts
Use a single ring called a(n) to attach multiple slings to a hoist hook.
CORRECT ANSWER bull ring
The signal person uses to communicate load navigation directions to the crane
operator. CORRECT ANSWER ANSI hand signals
The way a sling is arranged to hold the load is called a rigging configuration, or .
CORRECT ANSWER hitch
A(n) hitch uses two or more slings to connect a load to a single hoist hook.
CORRECT ANSWER bridle
To form a choker hitch, wrap the sling around the load and pass the eye of the sling through a
to form a loop around the load. CORRECT ANSWER shackle
A(n) uses a pulley system to give a mechanical advantage for lifting loads.
CORRECT ANSWER hoist
A is used to move loads such as steel plates or concrete panels without the use of
slings. CORRECT ANSWER lifting clamp