Complete Solutions
ALTERA®: What is the radiographic landmark used to confirm
full articulation into anterior placement in the AP plane? Correct
Answers Through hole in middle of implant at midline
ALTERA®: What is the radiographic landmark used to confirm
full articulation into anterior placement in the Lateral plane?
Correct Answers Notch along anterior edge of implant
At what temperature must ViaCell be frozen? Correct Answers
Between -70°C and -90°C
At what temperature should the saline be to thaw the vial of
ViaCell? Correct Answers 95-102°F
Can cement be injected into the screw while it is still liquid?
Correct Answers No
COALITION MIS: Anchors should be selected to match the
respective color-coordinated spacer. Correct Answers False
COALITION MIS: Each anchor is to be incrementally impacted
one at a time, using fluoroscopy to monitor the advancement of
each Anchor. Correct Answers True
COALITION MIS: How can you ensure an anchor is correctly
loaded into the Double Barrel Anchor Guide? Correct Answers
All of the above
, COALITION MIS: If an Anchor needs to be removed from the
spacer once implanted, what should you advice the surgeon
before the removal? Correct Answers All of the above
COALITION MIS: The Double Barrel Anchor Guide will not
disengage from the spacer. What can you advise the surgeon to
do? (Select all that apply) Correct Answers Confirm the Hex
Driver is fully seated into the Threaded Rod hex hole , Ensure
both anchors are fully seated , Rotate Hex Driver
counterclockwise while simultaneously withdrawing the
instrument, rocking left/right as needed
COALITION MIS: The spacer should always be implanted as
far posterior as possible so that the positive stop on the Double
Anchor Guide contacts the vertebrae. Correct Answers False
CREO Fenestrated is offered in which of the following product
offerings? (Select all that apply) Correct Answers Threaded ,
Non-Threaded , MIS
CREO Threaded curved rods are offered in what lengths?
Correct Answers 20mm-150mm
CREO-MIS: A counter torque is required for final tightening.
Correct Answers True
CREO-MIS: The extended screw heads come in reduction
options of? Correct Answers 10 and 30mm reduction options
CREO-MIS: What is the diameter of the extended screw head?
Correct Answers 12.9mm