BICSI PRACTICE TEST-RETAKE QUESTIONS
WITH CORRECT ANSWERS 2025-2026
The 2 main considerations concerning the existing cabling are? CORRECT ANSWER
Grandfathered system
Abandoned cable 11-25
The type of cutover where cross-
connects are relocated one pair after another until completed is called a CORRECT
ANSWER rolling cut 11-28
Which practice involves moving the customer to a temporary office space until their section of
the retrofit is completed and then moving them back to their recabled office space?
CORRECT ANSWER Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the presence of li
ght? CORRECT ANSWER Fiber strand identifier 11-11
A provides a quick graphical representation of how the circuit is layed out?
CORRECT ANSWER CLR 11-27
A uses several pluggable modules to locate and Identify cables. CORRECT
ANSWER Office locator kit
A injects light (at a proper wavelength) and measures the results t the other end.
CORRECT ANSWER Light source and power meter
A detects the presence of light within a fiber strand CORRECT
ANSWER Fiber strand identifier
, A uses a laser to identify fiber strands and find breaks in the fiber at the near end.
CORRECT ANSWER Visual fault locator
A will leave the customer momentarily without communications
CORRECT ANSWER Hot-cut 11-28
During a , cross-connects are relocated one pair after another until completed.
CORRECT ANSWER Rolling cut
* is a property of an electromagnetic field built around a conductor that opposes an
y changes in current flow in a circuit. CORRECT ANSWER Inductance
is a property of conductors that allows storage of electrical charges when poten
tial differences (voltages) exist between the conductors. CORRECT ANSWER Capacitance
*In AC circuits, the total opposition to current flow is called , which is measured in o
hms. CORRECT ANSWER Impedance
The nominal characteristic impedance of balanced twisted pair cable is ohms at 100
MHz CORRECT ANSWER 100
Pair 626 would be in the Super Binder CORRECT ANSWER Red
Series _______ s the preferred choice for longer runs CORRECT ANSWER 11
The connector/s have center pins (choose all that apply) CORRECT ANSWER
N BNC
WITH CORRECT ANSWERS 2025-2026
The 2 main considerations concerning the existing cabling are? CORRECT ANSWER
Grandfathered system
Abandoned cable 11-25
The type of cutover where cross-
connects are relocated one pair after another until completed is called a CORRECT
ANSWER rolling cut 11-28
Which practice involves moving the customer to a temporary office space until their section of
the retrofit is completed and then moving them back to their recabled office space?
CORRECT ANSWER Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the presence of li
ght? CORRECT ANSWER Fiber strand identifier 11-11
A provides a quick graphical representation of how the circuit is layed out?
CORRECT ANSWER CLR 11-27
A uses several pluggable modules to locate and Identify cables. CORRECT
ANSWER Office locator kit
A injects light (at a proper wavelength) and measures the results t the other end.
CORRECT ANSWER Light source and power meter
A detects the presence of light within a fiber strand CORRECT
ANSWER Fiber strand identifier
, A uses a laser to identify fiber strands and find breaks in the fiber at the near end.
CORRECT ANSWER Visual fault locator
A will leave the customer momentarily without communications
CORRECT ANSWER Hot-cut 11-28
During a , cross-connects are relocated one pair after another until completed.
CORRECT ANSWER Rolling cut
* is a property of an electromagnetic field built around a conductor that opposes an
y changes in current flow in a circuit. CORRECT ANSWER Inductance
is a property of conductors that allows storage of electrical charges when poten
tial differences (voltages) exist between the conductors. CORRECT ANSWER Capacitance
*In AC circuits, the total opposition to current flow is called , which is measured in o
hms. CORRECT ANSWER Impedance
The nominal characteristic impedance of balanced twisted pair cable is ohms at 100
MHz CORRECT ANSWER 100
Pair 626 would be in the Super Binder CORRECT ANSWER Red
Series _______ s the preferred choice for longer runs CORRECT ANSWER 11
The connector/s have center pins (choose all that apply) CORRECT ANSWER
N BNC
