Fire Alarm Installation Methods – ESA Test. Newest . Questions with Correct Verified Answers. Graded A

Fire Alarm Installation Methods – ESA
Test. Newest 2025-2026. Questions
with Correct Verified Answers. Graded
A

- ANS-alarms are indicated within 10 seconds
-Alarm conditions are repeated by the receiver every 60 seconds until the
output appliance sends a confirmation signal
-Output, appliances operate until manually reset at the receiver/control unit


- ANS
-elevator lobby
-Hoistway
-Machine room


- ANS-fire alarm control unit
-Notification appliance circuit power extenders
-Supervising station transmitting equipment


- ANS-Industry requirements
-Recognize standards
-Integrated technology
-Certification requirements


- ANS-Ionization

1

, -Photoelectric


- ANS-smoke may block exit signs
-Lightbulbs may burn out
-People habitually use the same route They entered the building.


- ANS-where they are separated by a barrier
-If in a raceway with an enclosure that separates the power limited from the
non-power, limited and/or communication circuits


- ANS10 dB above the average ambient sound level


- ANS24 hours normal load in five minutes alarm load


- ANS3


- ANS3


- ANS3


- ANS36 inches


- ANS40


- ANS5 feet


- ANS75 dBA, 110 dBA

2