CRAS Cycle 1-4 MP100 Final Exam Questions and Answers
1. What are common parameters of Room Size, Pre-Delay, Reverb Time (Decay)
digital reverb?
2. Harmonics whole number multiples of the fundamental frequency
3. Fletcher-Munson Discovered the Equal Loudness Curves
4. RMS (Root Mean Square) The average of the peak amplitude values
5. What to buttons on the Tas- L/R and Flip
cam will configure it for mixdown
mode?
6. What buttons on the Neotek will Post, Fader, Fader, Fader, Line, Rev
configure it for mixdown mode?
7. What is normalled to the input of Multitrack Bus
the MTR?
8. What mode should you be in for All Sel Rep
overdubbing and mixdown on the
tape machine?
9. What mode on the MTR-90 is used Individual
for rehearsing, allowing some
tracks to be in input and others to
lay back?
10. What does the Direct Out feed on Patch Row S
the API?
11. What tracks does the Direct Out 27-32
feed on the Neotek?
1/8
, 12. Search Zero Fast forwards or rewinds the tape to 0 on the MTR-90
13. What button will take the tape to Search
the time in the locate time win-
dow on the MTR-90?
14. All Safe Disables recording on all tracks on the MTR-90
15. C/R PGM What button in the master section on the API allows for
internal monitoring?
16. On the API, what is the name of Grand Master
the main console output fader?
17. What button in the master sec- C/R Play
tion on the API allows for external
monitoring?
18. Where does a microphone pick up On axis
the most amount of sound?
19. If two instruments are almost the Timbre
same pitch or sound, what is this
called?
20. Where does the half normal At the input
break?
21. What is the speed of sound? 1,130 feet per second at 70 degrees Fahrenheit and it will
increase or decrease by 1.1 feet per degree
22. When using parallel compression Pre so the signal is going into fader for the parallel com-
should your AUX send be pre or pression
post?
2/8
1. What are common parameters of Room Size, Pre-Delay, Reverb Time (Decay)
digital reverb?
2. Harmonics whole number multiples of the fundamental frequency
3. Fletcher-Munson Discovered the Equal Loudness Curves
4. RMS (Root Mean Square) The average of the peak amplitude values
5. What to buttons on the Tas- L/R and Flip
cam will configure it for mixdown
mode?
6. What buttons on the Neotek will Post, Fader, Fader, Fader, Line, Rev
configure it for mixdown mode?
7. What is normalled to the input of Multitrack Bus
the MTR?
8. What mode should you be in for All Sel Rep
overdubbing and mixdown on the
tape machine?
9. What mode on the MTR-90 is used Individual
for rehearsing, allowing some
tracks to be in input and others to
lay back?
10. What does the Direct Out feed on Patch Row S
the API?
11. What tracks does the Direct Out 27-32
feed on the Neotek?
1/8
, 12. Search Zero Fast forwards or rewinds the tape to 0 on the MTR-90
13. What button will take the tape to Search
the time in the locate time win-
dow on the MTR-90?
14. All Safe Disables recording on all tracks on the MTR-90
15. C/R PGM What button in the master section on the API allows for
internal monitoring?
16. On the API, what is the name of Grand Master
the main console output fader?
17. What button in the master sec- C/R Play
tion on the API allows for external
monitoring?
18. Where does a microphone pick up On axis
the most amount of sound?
19. If two instruments are almost the Timbre
same pitch or sound, what is this
called?
20. Where does the half normal At the input
break?
21. What is the speed of sound? 1,130 feet per second at 70 degrees Fahrenheit and it will
increase or decrease by 1.1 feet per degree
22. When using parallel compression Pre so the signal is going into fader for the parallel com-
should your AUX send be pre or pression
post?
2/8
