AMMO 49 graded a+ \\\ pass !!! 100% correct answers and
questions
An example of an Explosives Safety Officer (ESO) duty for Program I: Explosives Safety
Management is - answer-Managing the station's Explosives Safety Program
When does an SOP expire? - answer-4 years from the approval date
What is a pier/wharf safety observer? - answer-Qualified/Certified personnel
responsible for observing hazardous material handling to prevent rough or unsafe
handling.
What is the maximum height allowable for vegetation surrounding a magazine? -
answer-18 inches
Lightning protection system (LPS) inspections are guided by - answer-LPS test plans
Ground metal objects (e.g., air conditioning units, pipes, sprinklers, etc.) within ____
feet of an LPS conductor are often bonded to it. - answer-6 feet
What is the correct action to take if the chain of custody is compromised for materials
documented as safe (MDAS)? - answer-Material is designated MPPEH and go through
the MPPEH process again
Drivers operating government owned vehicles (GOV) must have a U.S. Government
Motor Vehicle Operator's License OF-346. - answer-True
Which is an example of a valid lock and key policy? - answer-
What is the acceptable timeframe for tagging/labeling an item after receiving an
URGENT NAR? - answer-1 business day
What are the A&E leadership responsibilities for supporting the QUAL/CERT program? -
answer-1.) Ensuring safety training addresses ES practices and principles
2.) Monitoring the activities QUAL/CERT programs for OPNAVIST 8020.14 compliance
, 3.) Assuring personnel involved with A&E operations receive required training
What requirements are needed for QUAL/CERT? Select all that apply. - answer-1.)
QUAL/CERT training plan
2. QUAL/CERT board
3.) Medical examinations
4.) Proficiency demonstrations
Certified personnel were moving ammo from a magazine to a training range. Before
they reached the range, there was a mishap. One person was injured. The investigation
determined that personnel had not followed safety. Procedures and were being
careless. What action should be taken on the personnel certification? - answer-
Revocation
Are site/building diagrams always required as part of an SOP? - answer-No.
Site/building diagrams are optional in SOPs if a diagram approved by the process
supervisor is posted at the facility. How do you report a mishap? - answer-Send a
report through the CODR
What is a fire bill? - answer-A list of procedures you follow in case of a fire. They should
be posted throughout the station.
How is inerted ammunition that kept its original markings and paint identified as inert? -
answer-It is marked with a serial number that is traceable to a record of certification
and identification
What type of deviation is an exemption? - answer-A long-term deviation for operations
that cannot meet criteria at existing facilities
What is the maximum amount of time permitted for an exemption to be in effect? -
answer-5 years
What type of documentation is NOT required for explosives safety site approval request
(ESAR)? - answer-Ship arrivals???
What two actions are required to support Qualification/Certification training? Select all
that apply. - answer-Identify A&E personnel
Training all A&E personnel
When does a certification expire? - answer-Last day of the 12th month
Which A&E personnel must be qualified/certified before handling A&E? - answer-All
individuals (Navy and Civilian) who handle A&E
Where are Standard Operating Procedures (SOPs) required to be located? - answer-
On-hand in work areas at all times (areas where processing is performed)
questions
An example of an Explosives Safety Officer (ESO) duty for Program I: Explosives Safety
Management is - answer-Managing the station's Explosives Safety Program
When does an SOP expire? - answer-4 years from the approval date
What is a pier/wharf safety observer? - answer-Qualified/Certified personnel
responsible for observing hazardous material handling to prevent rough or unsafe
handling.
What is the maximum height allowable for vegetation surrounding a magazine? -
answer-18 inches
Lightning protection system (LPS) inspections are guided by - answer-LPS test plans
Ground metal objects (e.g., air conditioning units, pipes, sprinklers, etc.) within ____
feet of an LPS conductor are often bonded to it. - answer-6 feet
What is the correct action to take if the chain of custody is compromised for materials
documented as safe (MDAS)? - answer-Material is designated MPPEH and go through
the MPPEH process again
Drivers operating government owned vehicles (GOV) must have a U.S. Government
Motor Vehicle Operator's License OF-346. - answer-True
Which is an example of a valid lock and key policy? - answer-
What is the acceptable timeframe for tagging/labeling an item after receiving an
URGENT NAR? - answer-1 business day
What are the A&E leadership responsibilities for supporting the QUAL/CERT program? -
answer-1.) Ensuring safety training addresses ES practices and principles
2.) Monitoring the activities QUAL/CERT programs for OPNAVIST 8020.14 compliance
, 3.) Assuring personnel involved with A&E operations receive required training
What requirements are needed for QUAL/CERT? Select all that apply. - answer-1.)
QUAL/CERT training plan
2. QUAL/CERT board
3.) Medical examinations
4.) Proficiency demonstrations
Certified personnel were moving ammo from a magazine to a training range. Before
they reached the range, there was a mishap. One person was injured. The investigation
determined that personnel had not followed safety. Procedures and were being
careless. What action should be taken on the personnel certification? - answer-
Revocation
Are site/building diagrams always required as part of an SOP? - answer-No.
Site/building diagrams are optional in SOPs if a diagram approved by the process
supervisor is posted at the facility. How do you report a mishap? - answer-Send a
report through the CODR
What is a fire bill? - answer-A list of procedures you follow in case of a fire. They should
be posted throughout the station.
How is inerted ammunition that kept its original markings and paint identified as inert? -
answer-It is marked with a serial number that is traceable to a record of certification
and identification
What type of deviation is an exemption? - answer-A long-term deviation for operations
that cannot meet criteria at existing facilities
What is the maximum amount of time permitted for an exemption to be in effect? -
answer-5 years
What type of documentation is NOT required for explosives safety site approval request
(ESAR)? - answer-Ship arrivals???
What two actions are required to support Qualification/Certification training? Select all
that apply. - answer-Identify A&E personnel
Training all A&E personnel
When does a certification expire? - answer-Last day of the 12th month
Which A&E personnel must be qualified/certified before handling A&E? - answer-All
individuals (Navy and Civilian) who handle A&E
Where are Standard Operating Procedures (SOPs) required to be located? - answer-
On-hand in work areas at all times (areas where processing is performed)
