Georgia Underground Storage Tank Technician
Exam Questions And Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1. What is the primary purpose of leak detection systems in
underground storage tanks?
a) To reduce fuel usage
b) To comply with local building codes
c) To detect releases before they reach the environment
d) To prevent overfilling
Leak detection systems are designed to identify leaks early to
prevent contamination of soil and groundwater.
2. Which type of UST system component is most prone to corrosion?
a) Plastic piping
b) Fiberglass tank walls
c) Steel tank bottoms
d) Dispensers
Steel, especially the bottom of tanks in contact with soil, is highly
susceptible to corrosion.
3. Secondary containment in UST systems is intended to:
a) Increase storage capacity
b) Prevent tank overfilling
c) Contain leaks if the primary tank fails
d) Reduce fuel evaporation
, Secondary containment provides a barrier around the primary
tank to contain leaks and spills.
4. What is the required frequency for conducting precision tests on
UST leak detection equipment?
a) Weekly
b) Annually
c) Every three years
d) Only at installation
Precision testing ensures that the equipment functions accurately,
typically mandated every three years.
5. Which regulatory body enforces UST regulations in Georgia?
a) EPA Region 4
b) OSHA
c) Georgia Environmental Protection Division (EPD)
d) Georgia Public Service Commission
In Georgia, the EPD oversees compliance with UST rules.
6. What type of monitoring is used for interstitial spaces in double-
walled UST systems?
a) Visual inspection
b) Electronic leak detection
c) Manual sampling
d) Pressure testing only
Interstitial spaces are monitored electronically to detect leaks
between tank walls.
7. What is the minimum secondary containment requirement for
UST piping under federal rules?
a) None
, b) Gravel-filled trench
c) Double-walled piping or equivalent containment
d) Single-walled with cathodic protection
Secondary containment or equivalent is required to prevent leaks
into the environment.
8. What is the maximum allowable leak rate for UST tanks in Georgia
before mandatory corrective action is required?
a) 0.5 gallons per day
b) 1 gallon per month
c) 0.1 gallons per hour
d) 2 gallons per day
UST regulations define specific leak rate thresholds; exceeding 0.1
gallons per hour triggers action.
9. Which method is NOT commonly used for leak detection in USTs?
a) Statistical inventory reconciliation
b) Interstitial monitoring
c) Groundwater sampling
d) Fire extinguisher inspection
Fire extinguisher checks are unrelated to UST leak detection.
10. What is the purpose of cathodic protection on steel tanks?
a) Increase fuel capacity
b) Prevent corrosion of the steel
c) Reduce fuel vapor emissions
d) Strengthen tank walls
Cathodic protection uses electrical current to minimize corrosion
on steel surfaces.
, 11. How often must UST operators inspect spill prevention
equipment?
a) Monthly
b) Every 30 days
c) Annually
d) Only during installation
Monthly inspections ensure spill containment systems remain
functional.
12. Which type of substance is prohibited from being stored in
USTs without proper permitting?
a) Gasoline
b) Diesel fuel
c) Hazardous waste
d) Heating oil
USTs are strictly regulated for hazardous waste storage to prevent
environmental contamination.
13. What is the typical first step if a release is suspected at a UST
site?
a) Remove the tank immediately
b) Notify local fire department
c) Conduct site assessment and confirm the release
d) Install new piping
Proper assessment is critical to confirm the presence and extent of
contamination before corrective measures.
14. How is tightness testing performed on USTs?
a) Visual inspection
b) Groundwater sampling
Exam Questions And Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1. What is the primary purpose of leak detection systems in
underground storage tanks?
a) To reduce fuel usage
b) To comply with local building codes
c) To detect releases before they reach the environment
d) To prevent overfilling
Leak detection systems are designed to identify leaks early to
prevent contamination of soil and groundwater.
2. Which type of UST system component is most prone to corrosion?
a) Plastic piping
b) Fiberglass tank walls
c) Steel tank bottoms
d) Dispensers
Steel, especially the bottom of tanks in contact with soil, is highly
susceptible to corrosion.
3. Secondary containment in UST systems is intended to:
a) Increase storage capacity
b) Prevent tank overfilling
c) Contain leaks if the primary tank fails
d) Reduce fuel evaporation
, Secondary containment provides a barrier around the primary
tank to contain leaks and spills.
4. What is the required frequency for conducting precision tests on
UST leak detection equipment?
a) Weekly
b) Annually
c) Every three years
d) Only at installation
Precision testing ensures that the equipment functions accurately,
typically mandated every three years.
5. Which regulatory body enforces UST regulations in Georgia?
a) EPA Region 4
b) OSHA
c) Georgia Environmental Protection Division (EPD)
d) Georgia Public Service Commission
In Georgia, the EPD oversees compliance with UST rules.
6. What type of monitoring is used for interstitial spaces in double-
walled UST systems?
a) Visual inspection
b) Electronic leak detection
c) Manual sampling
d) Pressure testing only
Interstitial spaces are monitored electronically to detect leaks
between tank walls.
7. What is the minimum secondary containment requirement for
UST piping under federal rules?
a) None
, b) Gravel-filled trench
c) Double-walled piping or equivalent containment
d) Single-walled with cathodic protection
Secondary containment or equivalent is required to prevent leaks
into the environment.
8. What is the maximum allowable leak rate for UST tanks in Georgia
before mandatory corrective action is required?
a) 0.5 gallons per day
b) 1 gallon per month
c) 0.1 gallons per hour
d) 2 gallons per day
UST regulations define specific leak rate thresholds; exceeding 0.1
gallons per hour triggers action.
9. Which method is NOT commonly used for leak detection in USTs?
a) Statistical inventory reconciliation
b) Interstitial monitoring
c) Groundwater sampling
d) Fire extinguisher inspection
Fire extinguisher checks are unrelated to UST leak detection.
10. What is the purpose of cathodic protection on steel tanks?
a) Increase fuel capacity
b) Prevent corrosion of the steel
c) Reduce fuel vapor emissions
d) Strengthen tank walls
Cathodic protection uses electrical current to minimize corrosion
on steel surfaces.
, 11. How often must UST operators inspect spill prevention
equipment?
a) Monthly
b) Every 30 days
c) Annually
d) Only during installation
Monthly inspections ensure spill containment systems remain
functional.
12. Which type of substance is prohibited from being stored in
USTs without proper permitting?
a) Gasoline
b) Diesel fuel
c) Hazardous waste
d) Heating oil
USTs are strictly regulated for hazardous waste storage to prevent
environmental contamination.
13. What is the typical first step if a release is suspected at a UST
site?
a) Remove the tank immediately
b) Notify local fire department
c) Conduct site assessment and confirm the release
d) Install new piping
Proper assessment is critical to confirm the presence and extent of
contamination before corrective measures.
14. How is tightness testing performed on USTs?
a) Visual inspection
b) Groundwater sampling
