FANUC QUIZ 2 QUESTIONS WITH VERIFIED ANSWERS

FANUC QUIZ 2 QUESTIONS WITH VERIFIED ANSWERS



/. The Deadman Switch must be engaged when jogging the robot. - Answer-✅True

/.The teach Pendent must be on in order to access the menu screen. - Answer-✅False

/.It is important to visually inspect the robot, the controller, the workcell, and the
surrounding area prior to applying power to the robot. - Answer-✅True

/.The best way to interrupt (stop) a program is to cycle power to the robot while the
program is still running. - Answer-✅False

/.Changing the robot's Coordinate System (COORD) changes the manner in which the
robot will move. - Answer-✅True

/.The SHIFT key must be depressed while adjusting the robot's jog speed. - Answer-
✅False

/.1. When the robot is jogged in WORLD Frame, multiple joints move together to keep
the tool center point referenced to a Cartesian frame. - Answer-✅True

/.1. To jog the robot to the left (CCW) in WORLD Mode you would use the "X" key on
the Teach Pendent - Answer-✅False

/.When you view positional data in the JOINT Representation mode, the data that you
view is a measurement of degrees from the zero degree position. - Answer-✅True

/.When you view positional data in the WORLD Representation mode, the data that you
view is a measurement of degrees from the zero degree position. - Answer-✅False

/.1. What must occur before a program can be run from the Teach Pendent?

A. The Deadman Switch must be engaged
B. The Teach Pendent must be turned on
C. The Emergency Stop Switch must be engaged (pushed in).
D. Both A & B - Answer-✅D. Both A & B