UA Rigging Exam Questions And
Answers 2025|2026 Verified Graded A+
Already Passed!
If equipment contacts an overhead wire, the safest thing to do is to ___.
- correct answer-stay put
Most crane signals are made with the ___. - correct answer-right hand
When a(n) ___ alarm is given or when leaving a crane overnight, ground
chocks must be set on truck and crawler cranes. - correct answer-wind
All persons involved in a hoisting operation should be warned to ___. -
correct answer-keep clear of moving cables or ropes
,The ___ is generally responsible for the safety of a crane operation as
soon as the load is lifted clear of the ground. - correct answer-crane
operator
___ and OSHA require the use of approved crane and hoist signals. -
correct answer-ANSI
The ___ type of chain hoist is the one most frequently used in the
piping trades. - correct answer-spur gear
The ___ on a chain hoist is designed as the weakest part and will spread
when overloaded. - correct answer-lower hook
The ___ chain hoist is the most efficient of all chain hoists. - correct
answer-spur gear
When drifting loads using two or more chain hoists, the angle of lift
should not exceed ___ degrees with the vertical. - correct answer-30
, According to the number of ___, blocks are designated as single,
double, or triple. - correct answer-sheaves
The ___ has the simplest construction and employs the basic lever-and-
fulcrum principle. - correct answer-ratchet jack
___ are the most versatile general purpose jacks and permit safe lifting,
lowering, skidding, and leveling. - correct answer-ratchet jacks
A ___ is sometimes called a come-along or a lugall. - correct answer-
cable winch hoist
Jacking metal against metal is not permitted; use ___. - correct answer-
wood softeners
Answers 2025|2026 Verified Graded A+
Already Passed!
If equipment contacts an overhead wire, the safest thing to do is to ___.
- correct answer-stay put
Most crane signals are made with the ___. - correct answer-right hand
When a(n) ___ alarm is given or when leaving a crane overnight, ground
chocks must be set on truck and crawler cranes. - correct answer-wind
All persons involved in a hoisting operation should be warned to ___. -
correct answer-keep clear of moving cables or ropes
,The ___ is generally responsible for the safety of a crane operation as
soon as the load is lifted clear of the ground. - correct answer-crane
operator
___ and OSHA require the use of approved crane and hoist signals. -
correct answer-ANSI
The ___ type of chain hoist is the one most frequently used in the
piping trades. - correct answer-spur gear
The ___ on a chain hoist is designed as the weakest part and will spread
when overloaded. - correct answer-lower hook
The ___ chain hoist is the most efficient of all chain hoists. - correct
answer-spur gear
When drifting loads using two or more chain hoists, the angle of lift
should not exceed ___ degrees with the vertical. - correct answer-30
, According to the number of ___, blocks are designated as single,
double, or triple. - correct answer-sheaves
The ___ has the simplest construction and employs the basic lever-and-
fulcrum principle. - correct answer-ratchet jack
___ are the most versatile general purpose jacks and permit safe lifting,
lowering, skidding, and leveling. - correct answer-ratchet jacks
A ___ is sometimes called a come-along or a lugall. - correct answer-
cable winch hoist
Jacking metal against metal is not permitted; use ___. - correct answer-
wood softeners
