Telecom Tower Technician 1 Exam Practice Questions and
Answers |Fall 2026/2027 Update | 100% Correct
Question 1
The basket slings on a gin pole perform what function?
Correct Answer
Support part of the weight and vertical forces
Question 2
What is the minimum force that a work positioning system anchorage must be able to withstand?
Correct Answer
2 times the arresting force or 3,000 lbs
Question 3
What term identifies a monopole component?
Correct Answer
Base flange
Page 1 of 21
,Question 4
All antennas are presumed active
Correct Answer
True
Question 5
When using bolts or u-bolts with a slotted hole present, what order are the components installed?
Correct Answer
Flat washer, lock washer, then nut
Question 6
If you have a 16 ft ladder leaning against a building wall, how many feet from the wall does the base need to be to provide
the correct slope?
Correct Answer
4 ft
Question 7
For structural loading purposes the basket and bridle slings shall always be attached where?
Correct Answer
At a panel point around the leg
Page 2 of 21
, Question 8
A hoist operator will respond to a stop signal from whom?
Correct Answer
Any source
Question 9
When calculating a fall distance using a 6 foot energy absorber, what is the maximum pull out distance?
Correct Answer
4 feet
Question 10
How often shall all gin poles have a documented job inspection?
Correct Answer
Daily
Question 11
What do the letters LOTO stand for?
Correct Answer
Lockout Tagout
Page 3 of 21
Answers |Fall 2026/2027 Update | 100% Correct
Question 1
The basket slings on a gin pole perform what function?
Correct Answer
Support part of the weight and vertical forces
Question 2
What is the minimum force that a work positioning system anchorage must be able to withstand?
Correct Answer
2 times the arresting force or 3,000 lbs
Question 3
What term identifies a monopole component?
Correct Answer
Base flange
Page 1 of 21
,Question 4
All antennas are presumed active
Correct Answer
True
Question 5
When using bolts or u-bolts with a slotted hole present, what order are the components installed?
Correct Answer
Flat washer, lock washer, then nut
Question 6
If you have a 16 ft ladder leaning against a building wall, how many feet from the wall does the base need to be to provide
the correct slope?
Correct Answer
4 ft
Question 7
For structural loading purposes the basket and bridle slings shall always be attached where?
Correct Answer
At a panel point around the leg
Page 2 of 21
, Question 8
A hoist operator will respond to a stop signal from whom?
Correct Answer
Any source
Question 9
When calculating a fall distance using a 6 foot energy absorber, what is the maximum pull out distance?
Correct Answer
4 feet
Question 10
How often shall all gin poles have a documented job inspection?
Correct Answer
Daily
Question 11
What do the letters LOTO stand for?
Correct Answer
Lockout Tagout
Page 3 of 21
