NEIEP 500 Final Exam|| QUESTIONS AND CORRECT
DETAILED ANSWERS||VERIFIED EXAM!!! (VERIFIED
ANSWERS) |ALREADY GRADED A+||NEWEST EXAM!!!
What does ASME code require on the car top in addition
to inspector control station? - ANSWER-A light and duplex
outlet
How should AC incandescent lamp sockets be connected?
- ANSWER-Connect the hot lead to the center terminal
and ground conductor to the shell
What type of conduit should you use to pipe an isolated
car? - ANSWER-Flex
In order to work safely when wiring the car, which of the
following should you always do? - ANSWER-Lock out and
tag out the main disconnect
At what distance from closed must the gate switch
operate? - ANSWER-2in
WHAT is the car top device called which slows elevator if
normal slowdowns fail? - ANSWER-Terminal speed
limiting device
,2|Page
What safety device is required with automatically closing,
vertical sliding, freight doors? - ANSWER-A warning bell
What can be shown on a sixteen segment display? -
ANSWER-Numbers and letters
What is the minimum number of spare wires that should
be pulled? - ANSWER-10%
When making connections at terminal posts, how should
the traveling cables be connected? - ANSWER-on the top
When more than one screw is used as a terminal, how are
the screws connected? - ANSWER-with a shorting bar
What type of solder must be used on electrical wires? -
ANSWER-Rosin cor
What distance away from the floor is a solid state driven
elevator allowed to move with doors open? - ANSWER-3
in
, 3|Page
Which statement is correct about using wire nuts? -
ANSWER-Screw the wire nut over the splice using pliers
to get it tight
What is required if the strain wire is to be used as a
ground? - ANSWER-Insulated covering
When using a hoisting line to install cables, what device
could be used to prevent twisting? - ANSWER-Swivel ling
What is the ratio between cable diameter and the size of
the loop? - ANSWER-30 times
How fast does the loop in relation to car speed? -
ANSWER-½ car speed
Why are new traveling cables allowed to hang free for a
time? - ANSWER-To relieve torsional stress
How must traveling cable be unreeled into the hoistway? -
ANSWER-Place the reel so the cable unreels from the
bottom