Fire Alarm Certification Program Level 1
FIRE ALARM CERTIFICATION PROGRAM LEVEL 1 NEWEST ACTUAL
EXAM COMPLETE 100 QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED A+||BRAND
NEW VERSION!!
According to Article 760 of the NEC, fire alarm conductors must be protected from
mechanical damage when the cable is installed within ? of the finished floor.
a.7'
b.7.5'
c.8'
d.10'
a. 7'
Heat detector spacing on joisted ceilings must be reduced by ? perpendicular to
the joists.
a.25%
b.33%
c.50%
d.66%
50%
A 30-candela strobe covers a maximum area of ? when centered on a wall.
a.20' x 20'
b.25' x 25'
c.28' x 28'
d.40' x 40'
28' x 28'
An emergency voice/alarm communications system must have a minimum
standby capacity of 48 hours. t/f
false
1|Page
, Fire Alarm Certification Program Level 1
Smoke detection is most appropriate for which of the following occupancy types?
a.Business occupancies
b.Hotels
c.Medical clinic
d.All of the above
All of the above
A photoelectric smoke detector is best at detecting ? fires.
a.fast-developing
b.flaming
c.incipient
d.smoldering
smoldering
Graphic annunciators should be used in ? .
a.a large industrial complex
b.place of a fire alarm panel
c.small residential buildings
d.all of the above
a large industrial complex
In order to become listed, smoke detectors must respond to obscuration levels
between ? .
a.0.5 and 3% per foot
b.0.5 and 4% per foot
c.0 and 2% per foot
d.1 and 3% per foot
0.5 and 4% per foot
Early warning of fire is best provided by using ? detectors.
a.heat
b.manual
2|Page
, Fire Alarm Certification Program Level 1
c.smoke
d.waterflow
smoke
An average ambient sound pressure level of 60 dBA with a maximum sound
pressure level of 63 dBA would require a signal sound pressure level of ? for public
mode signaling.
a.65 dBA
b.68 dBA
c.70 dBA
d.75 dBA
75 dBA
The prevention of smoke spread throughout a building is accomplished by ? .
a.door unlocking
b.duct smoke detectors
c.early warning
d.heat detectors
duct smoke detectors
A spot-type smoke detector covers a(n) ? area of protection.
a.circular
b.oval
c.rectangular
d.square
circular
Which of the following is a referenced code that is typically found in a fire alarm
specification?
a.IBC
b.NFPA 10
c.UL268
d.UL864
3|Page
FIRE ALARM CERTIFICATION PROGRAM LEVEL 1 NEWEST ACTUAL
EXAM COMPLETE 100 QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY GRADED A+||BRAND
NEW VERSION!!
According to Article 760 of the NEC, fire alarm conductors must be protected from
mechanical damage when the cable is installed within ? of the finished floor.
a.7'
b.7.5'
c.8'
d.10'
a. 7'
Heat detector spacing on joisted ceilings must be reduced by ? perpendicular to
the joists.
a.25%
b.33%
c.50%
d.66%
50%
A 30-candela strobe covers a maximum area of ? when centered on a wall.
a.20' x 20'
b.25' x 25'
c.28' x 28'
d.40' x 40'
28' x 28'
An emergency voice/alarm communications system must have a minimum
standby capacity of 48 hours. t/f
false
1|Page
, Fire Alarm Certification Program Level 1
Smoke detection is most appropriate for which of the following occupancy types?
a.Business occupancies
b.Hotels
c.Medical clinic
d.All of the above
All of the above
A photoelectric smoke detector is best at detecting ? fires.
a.fast-developing
b.flaming
c.incipient
d.smoldering
smoldering
Graphic annunciators should be used in ? .
a.a large industrial complex
b.place of a fire alarm panel
c.small residential buildings
d.all of the above
a large industrial complex
In order to become listed, smoke detectors must respond to obscuration levels
between ? .
a.0.5 and 3% per foot
b.0.5 and 4% per foot
c.0 and 2% per foot
d.1 and 3% per foot
0.5 and 4% per foot
Early warning of fire is best provided by using ? detectors.
a.heat
b.manual
2|Page
, Fire Alarm Certification Program Level 1
c.smoke
d.waterflow
smoke
An average ambient sound pressure level of 60 dBA with a maximum sound
pressure level of 63 dBA would require a signal sound pressure level of ? for public
mode signaling.
a.65 dBA
b.68 dBA
c.70 dBA
d.75 dBA
75 dBA
The prevention of smoke spread throughout a building is accomplished by ? .
a.door unlocking
b.duct smoke detectors
c.early warning
d.heat detectors
duct smoke detectors
A spot-type smoke detector covers a(n) ? area of protection.
a.circular
b.oval
c.rectangular
d.square
circular
Which of the following is a referenced code that is typically found in a fire alarm
specification?
a.IBC
b.NFPA 10
c.UL268
d.UL864
3|Page
