569. Which is a common type of automatic alarm system?
A. Central Station Protective Signaling
B. Dry Signal Protective
C. Chemical Reaction
D. Cell Phone Initiated
Give this one a try later!
A. Central Station Protective Signaling
569. When laying out fire hose to be service tested, test lengths should be no more
than:
A. 400 feet.
B. 300 feet.
,C. 500 feet.
D. 1,000 feet.
Give this one a try later!
B. 300 feet.
569. Preincident surveys should be used:
A. to verify that private water systems are maintained in good operating condition.
B. for determining insurance rates.
C. to identify hazard and generate fees for violations.
D. determine hazard levels that should be posted for occupant safety.
Give this one a try later!
A. to verify that private water systems are maintained in good operating
condition.
569. Which is true regarding hose testing?
A. The entire hose length should not exceed 500 feet.
B. The pressure must be maintained for 20 minutes.
C. The life span for fire hose is five years.
D. Documentation should include manufacturer, type, size of hose, and the service
test pressure.
Give this one a try later!
, D. Documentation should include manufacturer, type, size of hose, and the
service test pressure.
Statement 1 If a fire building's electrical service has been interrupted, power can be
supplied by either a portable generator or from an apparatus.
Statement 2 Inverters convert 12-volt DC from a vehicle's electrical system to 110-volt
AC power.
Statement 3 An inverter can provide an unlimited amount of AC current.
A. Statement 1 is true; statements 2 and 3 are false.
B. Statements 1 and 2 are true; statement 3 is false.
C. Statement 1 is false; statements 2 and 3 are true.
D. All three statements are true.
Give this one a try later!
B. Statements 1 and 2 are true; statement 3 is false.
Statement 1 A saw should never be started on the ground before going to the roof for
vertical ventilation.
Statement 2 The saw should be run briefly at full throttle when in use.
Statement 3 The saw should always be run at full throttle when in actual ventilation
use; before the blade touches the roof decking, while cutting, and during removal of
the blade from the cut.
A. Statement 1 is true; statements 2 and 3 are false.
B. Statements 1 and 2 are true; statement 3 is false.
A. Central Station Protective Signaling
B. Dry Signal Protective
C. Chemical Reaction
D. Cell Phone Initiated
Give this one a try later!
A. Central Station Protective Signaling
569. When laying out fire hose to be service tested, test lengths should be no more
than:
A. 400 feet.
B. 300 feet.
,C. 500 feet.
D. 1,000 feet.
Give this one a try later!
B. 300 feet.
569. Preincident surveys should be used:
A. to verify that private water systems are maintained in good operating condition.
B. for determining insurance rates.
C. to identify hazard and generate fees for violations.
D. determine hazard levels that should be posted for occupant safety.
Give this one a try later!
A. to verify that private water systems are maintained in good operating
condition.
569. Which is true regarding hose testing?
A. The entire hose length should not exceed 500 feet.
B. The pressure must be maintained for 20 minutes.
C. The life span for fire hose is five years.
D. Documentation should include manufacturer, type, size of hose, and the service
test pressure.
Give this one a try later!
, D. Documentation should include manufacturer, type, size of hose, and the
service test pressure.
Statement 1 If a fire building's electrical service has been interrupted, power can be
supplied by either a portable generator or from an apparatus.
Statement 2 Inverters convert 12-volt DC from a vehicle's electrical system to 110-volt
AC power.
Statement 3 An inverter can provide an unlimited amount of AC current.
A. Statement 1 is true; statements 2 and 3 are false.
B. Statements 1 and 2 are true; statement 3 is false.
C. Statement 1 is false; statements 2 and 3 are true.
D. All three statements are true.
Give this one a try later!
B. Statements 1 and 2 are true; statement 3 is false.
Statement 1 A saw should never be started on the ground before going to the roof for
vertical ventilation.
Statement 2 The saw should be run briefly at full throttle when in use.
Statement 3 The saw should always be run at full throttle when in actual ventilation
use; before the blade touches the roof decking, while cutting, and during removal of
the blade from the cut.
A. Statement 1 is true; statements 2 and 3 are false.
B. Statements 1 and 2 are true; statement 3 is false.
