One of the most common causes of skidding is:
A. Driving for road conditions
B. Knowing weight shifts of heavy apparatus
C. Failing to anticipate obstacles
D. Proper use of auxiliary braking systems
Give this one a try later!
C. Failing to anticipate obstacles.
Elevating platforms that are 110 feet or shorter should be able to be raised from
bedded/stowed position to the maximum elevation and extension and be rotated:
A. 90 degrees in 180 seconds
B. 90 degrees in 150 seconds
, C. 180 degrees in 150 seconds
D. 180 degrees in 90 seconds
Give this one a try later!
B. 90 degrees in 150 seconds
Automatic locking capabilities for the stabilization system is a combination of the _____
valves.
A. Check and relief
B. Stack and monitor
C. Relief and actuators
D. Holding and selector
Give this one a try later!
D. Holding and selector.
A dual-pumping operation is:
A. Two pumpers requiring the same gpm
B. Two pumpers with equal discharge pressure
C. Mainly utilized during relay operations
D. Placing one pumper at a hydrant and a second pumper connected intake to intake
Give this one a try later!
D. Placing one pumper at a hydrant and a second pumper connected
intake to intake.
A. Driving for road conditions
B. Knowing weight shifts of heavy apparatus
C. Failing to anticipate obstacles
D. Proper use of auxiliary braking systems
Give this one a try later!
C. Failing to anticipate obstacles.
Elevating platforms that are 110 feet or shorter should be able to be raised from
bedded/stowed position to the maximum elevation and extension and be rotated:
A. 90 degrees in 180 seconds
B. 90 degrees in 150 seconds
, C. 180 degrees in 150 seconds
D. 180 degrees in 90 seconds
Give this one a try later!
B. 90 degrees in 150 seconds
Automatic locking capabilities for the stabilization system is a combination of the _____
valves.
A. Check and relief
B. Stack and monitor
C. Relief and actuators
D. Holding and selector
Give this one a try later!
D. Holding and selector.
A dual-pumping operation is:
A. Two pumpers requiring the same gpm
B. Two pumpers with equal discharge pressure
C. Mainly utilized during relay operations
D. Placing one pumper at a hydrant and a second pumper connected intake to intake
Give this one a try later!
D. Placing one pumper at a hydrant and a second pumper connected
intake to intake.
