FSVO STATE TEST 2025 NEWEST VERSION
QUESTION AND CORRECT DETAILED VERIFIED
ANSWERS FROM VERIFIED SOURCES BY EXPERT
RATED A GRADE.
Save
Terms in this set (50)
The purpose of using a spotter is to the driver by observing cross traffic the as the area
in the blind spot
horizontal and vertical openings, the vehicle dimensions.
operator must know: To effectively
judge the ability of a vehicle to pass
through areas of restricted
Which driving skill would not require Diminishing clearance
using a spotter?
The distance a vehicle travels from total stopping distance.
the point where you begin
recognizing the hazard until the
apparatus comes to a complete stop
is called the:
, The confined space turnaround 180
maneuver allows an operator to turn
the apparatus degrees
Improper tire pressures may cause poor handling
One method of performing an walk-around method.
apparatus/pretrip inspection is the
Before shutdown the apparatus 3 to 5
engine temperature should be
allowed to stabilize by idling it for
minutes.
Checking for voltage, electrolyte the battery.
level, and corrosion are all steps in
inspecting:
While traveling in the center lane of a brake to reduce speed and pass on the left side of
multiple-lane highway on an the vehicle.
emergency call, the vehicle in front
of you stops. You should:
The vacuum test requires a reading at 10
the end of 5 minutes with no more
than inches of vacuum being lost.
When responding to emergencies, does not allow the driver to disregard other
the use of warning devices: drivers.
When approaching unguarded come to a complete stop.
railroad crossings, the driver shall:
QUESTION AND CORRECT DETAILED VERIFIED
ANSWERS FROM VERIFIED SOURCES BY EXPERT
RATED A GRADE.
Save
Terms in this set (50)
The purpose of using a spotter is to the driver by observing cross traffic the as the area
in the blind spot
horizontal and vertical openings, the vehicle dimensions.
operator must know: To effectively
judge the ability of a vehicle to pass
through areas of restricted
Which driving skill would not require Diminishing clearance
using a spotter?
The distance a vehicle travels from total stopping distance.
the point where you begin
recognizing the hazard until the
apparatus comes to a complete stop
is called the:
, The confined space turnaround 180
maneuver allows an operator to turn
the apparatus degrees
Improper tire pressures may cause poor handling
One method of performing an walk-around method.
apparatus/pretrip inspection is the
Before shutdown the apparatus 3 to 5
engine temperature should be
allowed to stabilize by idling it for
minutes.
Checking for voltage, electrolyte the battery.
level, and corrosion are all steps in
inspecting:
While traveling in the center lane of a brake to reduce speed and pass on the left side of
multiple-lane highway on an the vehicle.
emergency call, the vehicle in front
of you stops. You should:
The vacuum test requires a reading at 10
the end of 5 minutes with no more
than inches of vacuum being lost.
When responding to emergencies, does not allow the driver to disregard other
the use of warning devices: drivers.
When approaching unguarded come to a complete stop.
railroad crossings, the driver shall:
