Correct answers for the 2024 Med Gas
Exam
Which source should not be utilized to power a WAGD system's
venturri?medical air
What kind of connectors are used to link the intake and exit
pipes of medical air compressors?Adaptable
Unless the _______ has concluded that such usage constitutes a
distinct hazard to life, it is permissible to continue using an
existing system that does not comply with the provisions of this
code.authority with jurisdiction
Outlet connections for cylinders and cryogenic liquid containers
must be made so that the attachment point becomes ________
when the outlet connection is removed.Unusable
Which of the following systems cannot be found in an outdoor
enclosure?sources of medicinal air compressors
,In order to maintain the integrity of the pipe system in the
event of a fire, brazed joints must be constructed using a
brazing alloy with a melting temperature greater than ____.Gas
cylinder 1000ºF manifolds must have ______ equal headers
with at least _______ connections and one average day's
supply.Two-two gas cylinder manifolds must activate a (n)
___________ signal and an indicator at each _______ alarm
panel to show when or shortly before a header switch.Local:
Master
Which alarm system or systems in a medical gas system with
emergency reserve will sound when the switch to the reserve
supply takes place, or shortly before?Master
When the line pressure dew point exceeds approx. +35°F, each
compressor site's medical air dew point high alarm will sound
on the master alarm panels.
, Hard-drawn, seamless copper tube type _________ is required
for medical-surgical vacuum systems.B88, B819, and B280
ASTM
Which of the following should be monitored for every
compressor that separates the oil-containing part from the
compression chamber?high temperature, gaseous
hydrocarbons
After the surfaces are prepared for brazing, joints must be
brazed within _______ hours.A pressure relief valve for medical
air compressor systems must be adjusted at ______ percent
above line pressure.Fifty
Central supply systems for medical vacuum shall be equipped
with filtration sized for _________ of peak calculated demand
while one is isolated. 100%
Exam
Which source should not be utilized to power a WAGD system's
venturri?medical air
What kind of connectors are used to link the intake and exit
pipes of medical air compressors?Adaptable
Unless the _______ has concluded that such usage constitutes a
distinct hazard to life, it is permissible to continue using an
existing system that does not comply with the provisions of this
code.authority with jurisdiction
Outlet connections for cylinders and cryogenic liquid containers
must be made so that the attachment point becomes ________
when the outlet connection is removed.Unusable
Which of the following systems cannot be found in an outdoor
enclosure?sources of medicinal air compressors
,In order to maintain the integrity of the pipe system in the
event of a fire, brazed joints must be constructed using a
brazing alloy with a melting temperature greater than ____.Gas
cylinder 1000ºF manifolds must have ______ equal headers
with at least _______ connections and one average day's
supply.Two-two gas cylinder manifolds must activate a (n)
___________ signal and an indicator at each _______ alarm
panel to show when or shortly before a header switch.Local:
Master
Which alarm system or systems in a medical gas system with
emergency reserve will sound when the switch to the reserve
supply takes place, or shortly before?Master
When the line pressure dew point exceeds approx. +35°F, each
compressor site's medical air dew point high alarm will sound
on the master alarm panels.
, Hard-drawn, seamless copper tube type _________ is required
for medical-surgical vacuum systems.B88, B819, and B280
ASTM
Which of the following should be monitored for every
compressor that separates the oil-containing part from the
compression chamber?high temperature, gaseous
hydrocarbons
After the surfaces are prepared for brazing, joints must be
brazed within _______ hours.A pressure relief valve for medical
air compressor systems must be adjusted at ______ percent
above line pressure.Fifty
Central supply systems for medical vacuum shall be equipped
with filtration sized for _________ of peak calculated demand
while one is isolated. 100%
