What items must be entered into the aircraft records after maintenance is performed?
Give this one a try later!
(1) A description or reference to work performed.
(2) The date of completion
(3) The signature, certificate number and type of certificate of the person
approving the aircraft for return to service.
,If a mixture of aviation gasoline and jet fuel is used in a reciprocating aircraft engine,
what are the possible results?
Give this one a try later!
Avgas contaminated by jet fuel must not be used in piston engines; the
engine may be damaged or destroyed.
What are some of the materials that are commonly used as the reinforcing component
in a composite structure?
Give this one a try later!
Fiberglass, Aramid (Kevlar), Graphite (Carbon) fiber, linen and paper.
Are all three states of matter affected by thermal expansion and if so, which state is
affected most?
Give this one a try later!
All three states are affected, with gases being affected the most.
If the maintenance procedures do not specify a torque value for a bolt or nut, how
can you determine the proper values?
Give this one a try later!
, Consult a standard torque table such as found in AC 43.13-1B
In addition to being securely clamped, what is the and additional requirement for
installing metal fuel, oil and hydraulic lines?
Give this one a try later!
The lines must be electrically bonded to the structure.
What part of the FARs describes the performance characteristics that a small aircraft
must demonstrate in order to be airworthy?
Give this one a try later!
FAR Part 23
What are the preferred cleaners for plastic surfaces such as windshields?
Give this one a try later!
Mild soap and water or a manufacturer approved cleaner.
What is the name for a part of a drawing used to bring out important details and how
is it drawn?
Give this one a try later!
, A detailed View, which is usually drawn to a larger scale than the main
drawing.
How can you convert a decimal into a percent?
Give this one a try later!
(1) Multiply the decimal by 100 and add the percent sign.
(2) Move the decimal point two places to the right and add the
percent sign.
How can you determine if a drawing has been changed?
Give this one a try later!
A record of the changes is listed either in a revision block or in ruled
columns, which may be in a corner of the drawing or next to the title block.
If you need to determine the serviceable dimensional limits for an engine part, what
publication would you consult?
Give this one a try later!
The current engine manufacturer's overhaul manual.
What are two types of fluid lines commonly found in aircraft?
Give this one a try later!
(1) A description or reference to work performed.
(2) The date of completion
(3) The signature, certificate number and type of certificate of the person
approving the aircraft for return to service.
,If a mixture of aviation gasoline and jet fuel is used in a reciprocating aircraft engine,
what are the possible results?
Give this one a try later!
Avgas contaminated by jet fuel must not be used in piston engines; the
engine may be damaged or destroyed.
What are some of the materials that are commonly used as the reinforcing component
in a composite structure?
Give this one a try later!
Fiberglass, Aramid (Kevlar), Graphite (Carbon) fiber, linen and paper.
Are all three states of matter affected by thermal expansion and if so, which state is
affected most?
Give this one a try later!
All three states are affected, with gases being affected the most.
If the maintenance procedures do not specify a torque value for a bolt or nut, how
can you determine the proper values?
Give this one a try later!
, Consult a standard torque table such as found in AC 43.13-1B
In addition to being securely clamped, what is the and additional requirement for
installing metal fuel, oil and hydraulic lines?
Give this one a try later!
The lines must be electrically bonded to the structure.
What part of the FARs describes the performance characteristics that a small aircraft
must demonstrate in order to be airworthy?
Give this one a try later!
FAR Part 23
What are the preferred cleaners for plastic surfaces such as windshields?
Give this one a try later!
Mild soap and water or a manufacturer approved cleaner.
What is the name for a part of a drawing used to bring out important details and how
is it drawn?
Give this one a try later!
, A detailed View, which is usually drawn to a larger scale than the main
drawing.
How can you convert a decimal into a percent?
Give this one a try later!
(1) Multiply the decimal by 100 and add the percent sign.
(2) Move the decimal point two places to the right and add the
percent sign.
How can you determine if a drawing has been changed?
Give this one a try later!
A record of the changes is listed either in a revision block or in ruled
columns, which may be in a corner of the drawing or next to the title block.
If you need to determine the serviceable dimensional limits for an engine part, what
publication would you consult?
Give this one a try later!
The current engine manufacturer's overhaul manual.
What are two types of fluid lines commonly found in aircraft?
