NICET Level 1 Fire Alarm Exam Questions and Answers with Verified
Solutions | Latest 2026 Update
Q: OSHA
Answer:
The Occupational Safety and Health Act (OSH Act) is the primary federal law which governs
occupational health and safety in the private sector and federal government in the United States. Its
main goal is to ensure employers provide employees with an environment free from recognized
hazards, such as exposure to toxic chemicals, excessive noise levels, mechanical dangers, heat or cold
stress, or unsanitary conditions
Q: OSHA 29 CFR, Part 1926.
Answer:
Ladders designed and built according to ANSI 14.1-5 meet the requirements
Q: The distance between the bottom of the ladder and the wall or support must be approximately the
length of the ladder
Answer:
1/4
Q: Wheel chocks shall be installed every time before an aerial lift is used true or false?
Answer:
false
Q: "Lockout/tagout" refers to specific
Answer:
practices and procedures to safeguard employees from the unexpected energization or startup of
machinery and equipment, or the release of hazardous energy during service or maintenance
activities.
Q: Employers must establish a training and information program for employees who are exposed to
hazardous chemicals in their work area. How often must this occur?
Answer:
-at the time of initial assignment
-whenever a new hazard is introduced into their work area
, Q: what code requires fire extinguisher to be provided 3000 ft2 in a protected building area
Answer:
OSHA 1926.150
Q: personal safety is whos responsibility?
Answer:
your responsibly
Q: A respirator is a device which removes solid particles from the air such as dust mold bacteria and
pollen
Answer:
False
Q: The MSDS or SDS sheets given the following information for a chemical
Answer:
Physical and chemical
Q: properties, physical and health hazards, emergency and first aid procedures Safety shoes for
performing electrical work must be
Answer:
Nonconductive
Q: Class K fires are fire that involve
Answer:
Cooking appliances that involve combustible cooking media (vegetable oil, animals oils and fats)
Q: When using a ladder for electrical work which is correct
Answer:
Rails must be non conductive
Q: A ladder must be able to support what times the weight of the anticipated load
Answer:
3.3 times
Q: When an employee may be exposed to hazardous chemicals when must training take place
Answer:
Solutions | Latest 2026 Update
Q: OSHA
Answer:
The Occupational Safety and Health Act (OSH Act) is the primary federal law which governs
occupational health and safety in the private sector and federal government in the United States. Its
main goal is to ensure employers provide employees with an environment free from recognized
hazards, such as exposure to toxic chemicals, excessive noise levels, mechanical dangers, heat or cold
stress, or unsanitary conditions
Q: OSHA 29 CFR, Part 1926.
Answer:
Ladders designed and built according to ANSI 14.1-5 meet the requirements
Q: The distance between the bottom of the ladder and the wall or support must be approximately the
length of the ladder
Answer:
1/4
Q: Wheel chocks shall be installed every time before an aerial lift is used true or false?
Answer:
false
Q: "Lockout/tagout" refers to specific
Answer:
practices and procedures to safeguard employees from the unexpected energization or startup of
machinery and equipment, or the release of hazardous energy during service or maintenance
activities.
Q: Employers must establish a training and information program for employees who are exposed to
hazardous chemicals in their work area. How often must this occur?
Answer:
-at the time of initial assignment
-whenever a new hazard is introduced into their work area
, Q: what code requires fire extinguisher to be provided 3000 ft2 in a protected building area
Answer:
OSHA 1926.150
Q: personal safety is whos responsibility?
Answer:
your responsibly
Q: A respirator is a device which removes solid particles from the air such as dust mold bacteria and
pollen
Answer:
False
Q: The MSDS or SDS sheets given the following information for a chemical
Answer:
Physical and chemical
Q: properties, physical and health hazards, emergency and first aid procedures Safety shoes for
performing electrical work must be
Answer:
Nonconductive
Q: Class K fires are fire that involve
Answer:
Cooking appliances that involve combustible cooking media (vegetable oil, animals oils and fats)
Q: When using a ladder for electrical work which is correct
Answer:
Rails must be non conductive
Q: A ladder must be able to support what times the weight of the anticipated load
Answer:
3.3 times
Q: When an employee may be exposed to hazardous chemicals when must training take place
Answer:
