Finish and Shingles Seabee BU A
School Test. Questions & Correct
Verified Answers 2026-2027. Graded A
1" installed from bottom and worked toward top. – ANS What is the
Minimum lap for lap siding?
1) 5-V crimp
2) Corrugated
3) Double-Rib What are 3 types of sheet metal panels? - ANSWhat are 3
types of sheet metal panels?
1) 7" down from top of door
2) 11" up from the bottom of the door
3) Third hinge if required, will be centered between the other two hinges. -
ANSHinge Layout positions
1) Corner board
2) Metal corner caps
3) mitered - ANSWhat are the 3 types of Corner covering?
1) Flat/ Sloping/Pitched
2)Gable
3) Hip
1
, 4) Intersecting - ANSList 4 Types of roofs.
1) King Post
2) W-type (Fink)
3) Scissors - ANSWhat are 3 types of gussets?
1) louvers
2) Soffit Vents
3) Ridge Vents
4) turbine ventilators - ANSWhat are the Types of ventilation?
1) Organic
2)Fiberglass - ANSWhat are 2 types of shingles?
1) Small head finishing
2) Flathead siding nails - ANSWhat are the Common types of nails for
shingles?
1/8" (Need to know) - ANSWhat is the clearance for the top hinge?
16" OC - ANSSiding should be nailed to each stud?
16", 18" and 24" - ANSWhat are the 3 standard lengths of shingles?
2' interval vertically and 12" to 16" OC. - ANSFelt paper when stapled
should be ?
2