1|Page
Texas Fire Alarm Exam Preparation Version 1 & 2
Newest 2026/2027 Complete 200 Questions And
Correct Answers (Verified Answers)|Already Graded
A+
Version 1
What is the purpose of fire alarm plans and record drawings tag? -
ANSWER-To certify that the plan or finished drawing of a fire system
meets all codes and standards
What five things should it say on the installation label? - ANSWER--DO
NOT REMOVE BY ORDER OF THE TEXAS FIRE MARSHALL
-INSTALLATION RECORD
-The firms name address telephone and registration number
-Installation date and licensee signature and license number
-The name of whoever planned the system
What five things should it say on the RESIDENTIAL installation label?
- ANSWER--DO NOT REMOVE BY ORDER OF THE TEXAS FIRE
MARSHALL INSTALLATION RECORD
,2|Page
-The firm's name address telephone and registration number
-Installation date and licensee signature and license number
-An inscription certifying the install meets code
When and where must the installation labels be placed? - ANSWER-
Inside the control panel cover or in a permanent location
When must a service label be used? - ANSWER-After any service that
has corrected and issue that was noted on a yellow or red label
How long must a service label stay in place? - ANSWER-Two years. An
agent of the Fire Marshall may remove it at any time.
What six things must be listed on a Service Label? - ANSWER--DO
NOT REMOVE BY ORDER OF THE TEXAS FIRE MARSHALL
SERVICE RECORD
-The firm's name address telephone and registration number
-Service date and licensee signature and license number
,3|Page
-A list of services performed
-Type of service - either general service or a correction of conditions
What does an inspection label show? What color is it? - ANSWER-It
shows that an inspection or test has taken place. It must be blue.
What seven things must an inspection label say? - ANSWER--DO NOT
REMOVE BY ORDER OF THE TEXAS FIRE MARSHALL
INSPECTION/TEST RECORD
-The firm's name address telephone and registration number
-INSPECTION date and licensee signature and license number
-Type of inspection - new install, Semi annual, quarterly or annual
-Date of last sensitivity test
-Status of the system after inspection, and whether a red or yellow label
was attached
, 4|Page
When should a yellow label be used? - ANSWER-If a system does not
meet applicable codes and standards
What must happen if a yellow label is attached? - ANSWER-The
property owner and local jurisdiction must be informed in writing within
five days of the label being attached
What five things must be listed on a yellow label? - ANSWER--DO
NOT REMOVE BY ORDER OF THE FIRE MARSHALL SYSTEM
DOES NOT COMPLY WITH APPLICABLE CODES AND
STANDARDS
-The firms name.address, telephone and registration number
-Date label was attached and licensee signature and number
a list of conditions resulting in the yellow label
Where should a yellow or red label be attached? - ANSWER-On the
outside of the control panel or in a permanent location
When should a red label be attached? - ANSWER-If a system does not
function or is inoperable
What does PLFA stand for? - CORRECT ANSWER=Power Limited Fire Alarm
Texas Fire Alarm Exam Preparation Version 1 & 2
Newest 2026/2027 Complete 200 Questions And
Correct Answers (Verified Answers)|Already Graded
A+
Version 1
What is the purpose of fire alarm plans and record drawings tag? -
ANSWER-To certify that the plan or finished drawing of a fire system
meets all codes and standards
What five things should it say on the installation label? - ANSWER--DO
NOT REMOVE BY ORDER OF THE TEXAS FIRE MARSHALL
-INSTALLATION RECORD
-The firms name address telephone and registration number
-Installation date and licensee signature and license number
-The name of whoever planned the system
What five things should it say on the RESIDENTIAL installation label?
- ANSWER--DO NOT REMOVE BY ORDER OF THE TEXAS FIRE
MARSHALL INSTALLATION RECORD
,2|Page
-The firm's name address telephone and registration number
-Installation date and licensee signature and license number
-An inscription certifying the install meets code
When and where must the installation labels be placed? - ANSWER-
Inside the control panel cover or in a permanent location
When must a service label be used? - ANSWER-After any service that
has corrected and issue that was noted on a yellow or red label
How long must a service label stay in place? - ANSWER-Two years. An
agent of the Fire Marshall may remove it at any time.
What six things must be listed on a Service Label? - ANSWER--DO
NOT REMOVE BY ORDER OF THE TEXAS FIRE MARSHALL
SERVICE RECORD
-The firm's name address telephone and registration number
-Service date and licensee signature and license number
,3|Page
-A list of services performed
-Type of service - either general service or a correction of conditions
What does an inspection label show? What color is it? - ANSWER-It
shows that an inspection or test has taken place. It must be blue.
What seven things must an inspection label say? - ANSWER--DO NOT
REMOVE BY ORDER OF THE TEXAS FIRE MARSHALL
INSPECTION/TEST RECORD
-The firm's name address telephone and registration number
-INSPECTION date and licensee signature and license number
-Type of inspection - new install, Semi annual, quarterly or annual
-Date of last sensitivity test
-Status of the system after inspection, and whether a red or yellow label
was attached
, 4|Page
When should a yellow label be used? - ANSWER-If a system does not
meet applicable codes and standards
What must happen if a yellow label is attached? - ANSWER-The
property owner and local jurisdiction must be informed in writing within
five days of the label being attached
What five things must be listed on a yellow label? - ANSWER--DO
NOT REMOVE BY ORDER OF THE FIRE MARSHALL SYSTEM
DOES NOT COMPLY WITH APPLICABLE CODES AND
STANDARDS
-The firms name.address, telephone and registration number
-Date label was attached and licensee signature and number
a list of conditions resulting in the yellow label
Where should a yellow or red label be attached? - ANSWER-On the
outside of the control panel or in a permanent location
When should a red label be attached? - ANSWER-If a system does not
function or is inoperable
What does PLFA stand for? - CORRECT ANSWER=Power Limited Fire Alarm
