For Expert help and assignment handling,
1
S-95 Testing Questions and Answers (100%
Correct Answers) Already Graded A+
What changed with the adoption of The Fire Code in July 2008? Ans:
Supervision of systems aside from interior fire alarm systems. The code
also affects thousands of fire alarm systems which didnt require C of F
Where might you find an approved fire alarm system? Ans: Assembly
© 2026 Assignment Expert
occupancies, I.e. theaters, school, auditoriums, business occupancies,
education occupancies, factories, malls, hotels etc.
What are the requirements for FLSD? Ans: Fire alarm system has two way
Guru01 - Stuvia
communication system with warden phone
Installed in a commercial/mixed high rise building
FAS with one/two way communication
Installed in a hotel building containing 50 or more sleeping rooms above
ground floor
What is the requirement for F-80? Ans: Fire alarm system in a homeless
shelter not requiring a FLSD
What is the requirement for F-53? Ans: FAS with one way communication
system (public announcement system), not requiring an FLSD/F-80
What is the requirement for S-95? Ans: FAS without voice communication
system and not requiring an FLSD, F-80, F-53
,For Expert help and assignment handling,
2
What must all C of F holders ensure with respect to their premises? Ans:
That FAS are approved by FDNY
What other C of F responsibilities can S-97 or S-98 perform? Ans: They
can perform responsibilities of S78/F78 but the other way around
What are the duties of S-95? Ans: The duties are visual inspection of
smoke detectors and other fire alarm system components
© 2026 Assignment Expert
What are the duties of S78/F78? Ans: The duties are visual inspection of
smoke detectors and smoke detectors inspection, testing and cleaning
What are the duties of S97/S98? Ans: The duties are visual inspection of
Guru01 - Stuvia
smoke detectors and other fire alarm system components
Smoke detector inspection, testing and cleaning
Smoke detector maintenance, and program, service, clean, test, repair
and/or replace low voltage fire alarm system components
What buildings are required to have FAS under new fire code? Ans: The
building that require FAS are office buildings, shelters, hospitals, marinas,
commercial, hotels, motels, schools and
apartment buildings high or low rise or as specified in NYC building code
section 309.1
What is a fire alarm system? Ans: An FAS is a system consisting of
components and circuits arranged to monitor and annunciate the status
of fire alarm and supervisory signal-initiating devices, and to initiate the
appropriate response to these signals
, For Expert help and assignment handling,
3
What is the primary purpose of fire alarm systems within a protected
premises? Ans: The purpose of a FAS is to warn building occupants and
transmit signals indicating a fire condition to the fire department via an
FDNY approved central station company
What is a FACP? Ans: An FACP is a system component that monitors
inputs and control outputs through various circuits
What is the primary purpose of FACP? Ans: The primary purpose is to
process signals received from initiating devices and to activate
© 2026 Assignment Expert
appropriate signals and outputs
What are the 3 types of signals initiated by FACP? Ans: They are fire
Guru01 - Stuvia
alarm signal, supervisory signal, and trouble signal
What is a fire alarm signal? Ans: It's a signal initiated by a fire alarm
initiating device like a manual fire alarm pull station, smoke detector,
water flow switch, or other device in which activation is indicative of
presence of fire or fire signature
What happens when a fire signal is generated? Ans: When fire signal is
generated the FACP activates the building audible and visual devices
connected to the fire alarm (I.e. horn/strobe), sends a signal to an FDNY
approved central station and activates control of certain building
function
What is the central station operator first priority? Ans: To monitor and
process fire alarm signals before any other signals, regardless of order
received
What do central station operators do when fire alarm signal is received?
Ans: They retransmit them to the fire department
1
S-95 Testing Questions and Answers (100%
Correct Answers) Already Graded A+
What changed with the adoption of The Fire Code in July 2008? Ans:
Supervision of systems aside from interior fire alarm systems. The code
also affects thousands of fire alarm systems which didnt require C of F
Where might you find an approved fire alarm system? Ans: Assembly
© 2026 Assignment Expert
occupancies, I.e. theaters, school, auditoriums, business occupancies,
education occupancies, factories, malls, hotels etc.
What are the requirements for FLSD? Ans: Fire alarm system has two way
Guru01 - Stuvia
communication system with warden phone
Installed in a commercial/mixed high rise building
FAS with one/two way communication
Installed in a hotel building containing 50 or more sleeping rooms above
ground floor
What is the requirement for F-80? Ans: Fire alarm system in a homeless
shelter not requiring a FLSD
What is the requirement for F-53? Ans: FAS with one way communication
system (public announcement system), not requiring an FLSD/F-80
What is the requirement for S-95? Ans: FAS without voice communication
system and not requiring an FLSD, F-80, F-53
,For Expert help and assignment handling,
2
What must all C of F holders ensure with respect to their premises? Ans:
That FAS are approved by FDNY
What other C of F responsibilities can S-97 or S-98 perform? Ans: They
can perform responsibilities of S78/F78 but the other way around
What are the duties of S-95? Ans: The duties are visual inspection of
smoke detectors and other fire alarm system components
© 2026 Assignment Expert
What are the duties of S78/F78? Ans: The duties are visual inspection of
smoke detectors and smoke detectors inspection, testing and cleaning
What are the duties of S97/S98? Ans: The duties are visual inspection of
Guru01 - Stuvia
smoke detectors and other fire alarm system components
Smoke detector inspection, testing and cleaning
Smoke detector maintenance, and program, service, clean, test, repair
and/or replace low voltage fire alarm system components
What buildings are required to have FAS under new fire code? Ans: The
building that require FAS are office buildings, shelters, hospitals, marinas,
commercial, hotels, motels, schools and
apartment buildings high or low rise or as specified in NYC building code
section 309.1
What is a fire alarm system? Ans: An FAS is a system consisting of
components and circuits arranged to monitor and annunciate the status
of fire alarm and supervisory signal-initiating devices, and to initiate the
appropriate response to these signals
, For Expert help and assignment handling,
3
What is the primary purpose of fire alarm systems within a protected
premises? Ans: The purpose of a FAS is to warn building occupants and
transmit signals indicating a fire condition to the fire department via an
FDNY approved central station company
What is a FACP? Ans: An FACP is a system component that monitors
inputs and control outputs through various circuits
What is the primary purpose of FACP? Ans: The primary purpose is to
process signals received from initiating devices and to activate
© 2026 Assignment Expert
appropriate signals and outputs
What are the 3 types of signals initiated by FACP? Ans: They are fire
Guru01 - Stuvia
alarm signal, supervisory signal, and trouble signal
What is a fire alarm signal? Ans: It's a signal initiated by a fire alarm
initiating device like a manual fire alarm pull station, smoke detector,
water flow switch, or other device in which activation is indicative of
presence of fire or fire signature
What happens when a fire signal is generated? Ans: When fire signal is
generated the FACP activates the building audible and visual devices
connected to the fire alarm (I.e. horn/strobe), sends a signal to an FDNY
approved central station and activates control of certain building
function
What is the central station operator first priority? Ans: To monitor and
process fire alarm signals before any other signals, regardless of order
received
What do central station operators do when fire alarm signal is received?
Ans: They retransmit them to the fire department
