For Expert help and assignment handling,
1
Wood Shop Safety Test Study Guide Questions
and Answers (100% Correct Answers) Already
Graded A+
What is the margin of safety? Ans: 4 inches.
When using a saw, never... Ans: Feed the material faster than the saw
blade can remove the wood easily.
© 2026 Assignment Expert
The palm sander is used for what? Ans: removing small amounts of
material slowly.
Guru01 - Stuvia
All small work should be secured with what? Ans: A clamp or vise.
Make all adjustments on all power tools with the power off, except... Ans:
When adjusting the speed of the lathe.
Always cut.. Ans: Away from yourself when using a chisel, knife or any
edged tool.
What does it mean when your wood chips are burnt when you are
drilling? Ans: Your drill bit is dull.
The shortest board that can be safely run through the planer is... Ans: 12
inches.
The belt sander is used for what? Ans: removing large amounts of
material fast.
, For Expert help and assignment handling,
2
The power miter box is used for what? Ans: Cutting angles, bevels, and
crosscutting.
The most material you can take off on the planer at one time is... Ans:
One turn per pass.
How long does the board have to be to run through the performax
sander? Ans: 12 inches long.
© 2026 Assignment Expert
Then widest board that can be run through the planer is... Ans: 16
inches.
When crosscutting on the table saw you should use what? Ans: The
Guru01 - Stuvia
miter gauge.
When ripping on the table saw you should use the... Ans: rip fence.
The most you can take off with the performax sander per pass is... Ans:
1/8 of a turn.
You should never reach behind or in front of... Ans: The blade on the
power miter box.
The blade on the table saw should extend about... Ans: 1/8" above the
material when making a through cut.
When using a band saw, how should you make turns? Ans: Make turns
carefully and do not bend the blade.
When using a band saw, what does it mean if you hear a clicking or
screeching sound? Ans: The blade is bent or broken.
1
Wood Shop Safety Test Study Guide Questions
and Answers (100% Correct Answers) Already
Graded A+
What is the margin of safety? Ans: 4 inches.
When using a saw, never... Ans: Feed the material faster than the saw
blade can remove the wood easily.
© 2026 Assignment Expert
The palm sander is used for what? Ans: removing small amounts of
material slowly.
Guru01 - Stuvia
All small work should be secured with what? Ans: A clamp or vise.
Make all adjustments on all power tools with the power off, except... Ans:
When adjusting the speed of the lathe.
Always cut.. Ans: Away from yourself when using a chisel, knife or any
edged tool.
What does it mean when your wood chips are burnt when you are
drilling? Ans: Your drill bit is dull.
The shortest board that can be safely run through the planer is... Ans: 12
inches.
The belt sander is used for what? Ans: removing large amounts of
material fast.
, For Expert help and assignment handling,
2
The power miter box is used for what? Ans: Cutting angles, bevels, and
crosscutting.
The most material you can take off on the planer at one time is... Ans:
One turn per pass.
How long does the board have to be to run through the performax
sander? Ans: 12 inches long.
© 2026 Assignment Expert
Then widest board that can be run through the planer is... Ans: 16
inches.
When crosscutting on the table saw you should use what? Ans: The
Guru01 - Stuvia
miter gauge.
When ripping on the table saw you should use the... Ans: rip fence.
The most you can take off with the performax sander per pass is... Ans:
1/8 of a turn.
You should never reach behind or in front of... Ans: The blade on the
power miter box.
The blade on the table saw should extend about... Ans: 1/8" above the
material when making a through cut.
When using a band saw, how should you make turns? Ans: Make turns
carefully and do not bend the blade.
When using a band saw, what does it mean if you hear a clicking or
screeching sound? Ans: The blade is bent or broken.
