MEDSTUDY.COM
,MEDSTUDY.COM
Unit 01 Test Bank Automotive Mechanics
1. What precautions must be taken immediately after jacking a vehicle off the ground?
A. No precautions are needed
B. Check that the jack is in the correct position and carry on with repairs
C. Place supports in an area under the vehicle that is convenient to get in and out of
D. Safety stands should be placed under the jacking point or area of strength to support the vehicle
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Medium
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Machine and equipment safety
2. To avoid personal injury from rotating engine components, you should:
A. just be careful
B. not work on anything that could cause injury
C. roll your shirt sleeves up to reduce risk
D. have work clothing tucked in and long hair tied up
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Medium
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Vehicle safety
3. Protective footwear provides:
A. little protection from falling objects but looks good
B. some protection but can be slippery on smooth floors
C. waterproof protection in the rain
D. protection from falling objects and hazards on the floor
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Easy
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Personal safety in an automotive workplace
4. Which of the following is true when using compressed air?
A. It can cause death
B. It can force dirt into eyes
C. It can penetrate the skin
D. All of the given answers are correct
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Hard
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Machine and equipment safety
5. Who is responsible for using machinery safely?
A. The workplace safety officer
,MEDSTUDY.COM
B. The foreman
C. The employer
, MEDSTUDY.COM
D. The operator
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Hard
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Basic aspects of relevant state or territory WHS or OHS legislation
6. Machine guards should be:
A. removed when necessary if they are in the way
B. considered to be optional equipment
C. indicated with a bright red arrow
D. always fitted and used
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Easy
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Machine and equipment safety
7. Faulty electrical tools should be:
A. put back in the cupboard
B. used only when needed
C. fixed by someone in the workplace
D. tagged and isolated, and then all relevant staff should be informed
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Medium
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Machine and equipment safety
8. Spilt brake fluid should be removed by:
A. washing the affected area with coolant
B. allowing it to dry and peeling away the residue
C. wiping the affected area quickly with clean rags
D. washing it off with a large amount of water
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Medium
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Hazardous materials
9. Brake and clutch components could contain asbestos dust, and therefore repairers should:
A. never work on cars that may have asbestos parts
B. always blow brake dust away in the workplace
C. wipe brake and clutch dust with dry rags
D. not use compressed air or breathe dust
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Medium
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Hazardous materials
,MEDSTUDY.COM
Unit 01 Test Bank Automotive Mechanics
1. What precautions must be taken immediately after jacking a vehicle off the ground?
A. No precautions are needed
B. Check that the jack is in the correct position and carry on with repairs
C. Place supports in an area under the vehicle that is convenient to get in and out of
D. Safety stands should be placed under the jacking point or area of strength to support the vehicle
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Medium
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Machine and equipment safety
2. To avoid personal injury from rotating engine components, you should:
A. just be careful
B. not work on anything that could cause injury
C. roll your shirt sleeves up to reduce risk
D. have work clothing tucked in and long hair tied up
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Medium
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Vehicle safety
3. Protective footwear provides:
A. little protection from falling objects but looks good
B. some protection but can be slippery on smooth floors
C. waterproof protection in the rain
D. protection from falling objects and hazards on the floor
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Easy
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Personal safety in an automotive workplace
4. Which of the following is true when using compressed air?
A. It can cause death
B. It can force dirt into eyes
C. It can penetrate the skin
D. All of the given answers are correct
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Hard
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Machine and equipment safety
5. Who is responsible for using machinery safely?
A. The workplace safety officer
,MEDSTUDY.COM
B. The foreman
C. The employer
, MEDSTUDY.COM
D. The operator
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Hard
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Basic aspects of relevant state or territory WHS or OHS legislation
6. Machine guards should be:
A. removed when necessary if they are in the way
B. considered to be optional equipment
C. indicated with a bright red arrow
D. always fitted and used
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Easy
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Machine and equipment safety
7. Faulty electrical tools should be:
A. put back in the cupboard
B. used only when needed
C. fixed by someone in the workplace
D. tagged and isolated, and then all relevant staff should be informed
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Medium
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Machine and equipment safety
8. Spilt brake fluid should be removed by:
A. washing the affected area with coolant
B. allowing it to dry and peeling away the residue
C. wiping the affected area quickly with clean rags
D. washing it off with a large amount of water
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Medium
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Hazardous materials
9. Brake and clutch components could contain asbestos dust, and therefore repairers should:
A. never work on cars that may have asbestos parts
B. always blow brake dust away in the workplace
C. wipe brake and clutch dust with dry rags
D. not use compressed air or breathe dust
Competency: AURASA002 Follow safe working practices in an automotive workplace
Difficulty: Medium
Foundation skills: Learning
Foundation skills: Reading
Gradable: automatic
Topic: KE: Hazardous materials
