ACI CERTIFICATION - ANCHOR INSTALLER EXAM
NEWEST 2026 ACTUAL EXAM QUESTIONS AND
CORRECT DETAILED ANSWERS (VERIFIED
ANSWERS) ALL ANSWERED {70 Q & A} ALREADY
GRADED A+ | 100% GUARANTEED PASS
All adhesives for adhesive anchor installation have the same
fresh and hardened properties. - ✔✔✔ Correct Answer > False
Adhesive anchor failure in tension does NOT occur by - ✔✔✔ Correct
Answer > concrete pryout failure
Storage of adhesives should be done in accordance with the
MPII; generally, they should be stored in a __________, well-
ventilated storage location - ✔✔✔ Correct Answer > cool, dry, dark
The _________ is where the two adhesive components from a
cartridge flow into the mixing nozzle. - ✔✔✔ Correct Answer >
dispenser
, Page 2 of 12
Before using an adhesive, check the _________ date to ensure that
the product performance will be at its fullest capacity - ✔✔✔ Correct
Answer > expiration
The only part in an adhesive anchor system that is allowed to be
modified is the _________ - ✔✔✔ Correct Answer > extension tube
When using a piston plug in an overhead or horizontal
installation, it is important to pull firmly on the plug and
extension tubing to ensure a void-free hole. - ✔✔✔ Correct Answer >
False
Confirm that the mixing nozzle, extension tube or piston can
reach _________ the hole. - ✔✔✔ Correct Answer > the deepest part of
At the start of a new cartridge, check the MPII to determine how
much initial material, also called a ___________, should be
discarded to ensure that the adhesive used is properly mixed. -
✔✔✔ Correct Answer > dedication bead
When injecting a hole with adhesive, be sure to place the end of
the mixing nozzle or piston plug __________ of the hole - ✔✔✔
Correct Answer > at the deepest part