Neiep 510 Piping and Wiring the machine room
and hoistway Test STUDY GUIDE 2026 COMPLETE
QUESTIONS WITH CORRECT DETAILED
ANSWERS || 100% GUARANTEED PASS RECENT
VERSION
Save
Terms in this set (89)
One piece of safety equipment you Hard hat
should never be without on an
elevator installation is your ___.
Two manuals which you need a NEC, ASME
working knowledge of are the ___ and
___.
Welding hose can be visually green, red
identified because the oxygen hose
is ___, and the acetylene hose is ___.
The third wire in a three wire cord is mechanical ground
called the ___.
Electrical power tools must always Grounded
be properly ___.
, Electricity always seeks the ___ to shortest path
ground
A person can be electrocuted by as one hundredth (.01)
little as ___ amperes
An additional protection against GFCI
electric shock, required by osha on
all construction jobs, is a ___.
Protective clothing for electric arc Leather
welding should be made out of ___.
Welding cylinders must be stored upright
and used in an ___ position.
Coated-rod arc welding releases ___. Toxic fumes
You should never weld or burn metal Galvanized
that has been ___.
Tank gauges should be equipped anti-flashback
with ___ valves.
The fittings on acetylene hoses are Left-hand threads
equipped with ___.
The riser should be positioned as far Car clearance
forwards as possible, but your main
consideration is ___.
and hoistway Test STUDY GUIDE 2026 COMPLETE
QUESTIONS WITH CORRECT DETAILED
ANSWERS || 100% GUARANTEED PASS RECENT
VERSION
Save
Terms in this set (89)
One piece of safety equipment you Hard hat
should never be without on an
elevator installation is your ___.
Two manuals which you need a NEC, ASME
working knowledge of are the ___ and
___.
Welding hose can be visually green, red
identified because the oxygen hose
is ___, and the acetylene hose is ___.
The third wire in a three wire cord is mechanical ground
called the ___.
Electrical power tools must always Grounded
be properly ___.
, Electricity always seeks the ___ to shortest path
ground
A person can be electrocuted by as one hundredth (.01)
little as ___ amperes
An additional protection against GFCI
electric shock, required by osha on
all construction jobs, is a ___.
Protective clothing for electric arc Leather
welding should be made out of ___.
Welding cylinders must be stored upright
and used in an ___ position.
Coated-rod arc welding releases ___. Toxic fumes
You should never weld or burn metal Galvanized
that has been ___.
Tank gauges should be equipped anti-flashback
with ___ valves.
The fittings on acetylene hoses are Left-hand threads
equipped with ___.
The riser should be positioned as far Car clearance
forwards as possible, but your main
consideration is ___.
