FANUC Robot Certification EXAM Questions
with 100% Correct Answers | Verified | Updated
(Actual Exam)
Save
Practice questions for this set
Learn 1 /7 Study with Learn
At the center of the faceplate.
Choose an answer
What does each Mode Select
1 Work Cell 2
Switch do? Auto, T1, T2.
True/False The DCS barrier needs a
Where is the default TOOL center
3 gap between it and a physical 4
point(TCP)?
barrier.
Don't know?
Terms in this set (58)
, Work Cell The robot and everything around the robot that is
associated with it.
Work Envelope The area in which the robot operates in.
What does DCS stand for? Dual Check Safety.
What two variables does DCS Speed and positioning with two independent
check? CPUs.
True/False The DCS barrier needs a True
gap between it and a physical
barrier.
Robot F number and software To identify a robot and to view software version
version can be useful why? to ensure updates aren't needed.
How do you access positional Select the POSN key.
data?
What are the three positional Joint
statuses? World
User
True/False You need a good USER True
frame and TOOL frame before you
make a program.
True/False Joint positional data is in False
mm. Joint positional data is in degrees.
True/False WORLD Major Axes are True
in mm while the Minor Axes are in
degrees.
with 100% Correct Answers | Verified | Updated
(Actual Exam)
Save
Practice questions for this set
Learn 1 /7 Study with Learn
At the center of the faceplate.
Choose an answer
What does each Mode Select
1 Work Cell 2
Switch do? Auto, T1, T2.
True/False The DCS barrier needs a
Where is the default TOOL center
3 gap between it and a physical 4
point(TCP)?
barrier.
Don't know?
Terms in this set (58)
, Work Cell The robot and everything around the robot that is
associated with it.
Work Envelope The area in which the robot operates in.
What does DCS stand for? Dual Check Safety.
What two variables does DCS Speed and positioning with two independent
check? CPUs.
True/False The DCS barrier needs a True
gap between it and a physical
barrier.
Robot F number and software To identify a robot and to view software version
version can be useful why? to ensure updates aren't needed.
How do you access positional Select the POSN key.
data?
What are the three positional Joint
statuses? World
User
True/False You need a good USER True
frame and TOOL frame before you
make a program.
True/False Joint positional data is in False
mm. Joint positional data is in degrees.
True/False WORLD Major Axes are True
in mm while the Minor Axes are in
degrees.
