FULL NHIE EXAM PRACTICE
1. Where you have discovered evidence of footing settlement, how can you are expecting
whether or not there might be similarly agreement?
(a) You can be counted the range of planes of motion.
(b) You can decide the sort of basis material.
(c) You cannot predict agreement from a unmarried inspection.
(d) You can decide the intensity of the footing.
You cannot predict settlement from a unmarried inspection
2. You usually discover a Freon leak
(a) As an oil stain
(b) As refrigerant coming out of the Freon line in the shape of a chilly mist.
(c) By the sturdy smell.
(d) By looking for evidence of ice along the refrigerant traces
As an oil stain
three. Typical wooden frame wall assemblies consist of all of the following components
EXCEPT.
(a) Studs
(b) Bridging
(c) Sheathing
(d) Siding
Bridging
4. All of the subsequent are commonplace processes to improving chimney draft EXCEPT
(a) Adding a draft inducer fan.
(b) Adding a rain cap.
(c) Extending the chimney upward.
(d) Resloping the cap.
Resloping the cap
five. All of the subsequent statements are actual of shrinkage cracks EXCEPT that
,(a) Shrinkage cracks do no longer normally go into the footings.
(b) Shrinkage cracks do not necessarily have corresponding cracks
some other place inside the constructing.
(c) Vertical shear is associated with shrinkage cracks.
(d) Shrinkage cracks are commonplace with poured concrete basis
partitions.
Vertical shear is related to shrinkage cracks
6. Which of the subsequent is NOT commonly a aspect of a private water deliver machine?
(a) Foot valve
(b) Pump
(c) Pressure regulator
(d) Pressure tank
Pressure regulator
7. Split-machine, air-cooled, imperative air-conditioning systems have what number of fans?
(a) None
(b) One
(c) Two
(d) Four
Two
8. Insulated steel outside doorways with storm doors ought to be averted because they'll
(a) Increase warmness loss.
(b) Increase air leakage.
(c) Overheat.
(d) Have poor architectural appeal.
Overheat
9. You plug your circuit tester into an outlet that has a showering system plugged into it. Your
tester suggests that the hole is well stressed and down to earth. How may want to you enhance
this inspection procedure?
(a) Use a voltage tester
(b) Use a circuit tester with a GFI test button
(c) Unplug the washing gadget
(d) Turn the washing system on earlier than doing all your test.
,Unplug the showering machine
10. Given a basis wall this is cracked because of horizontal pressure
(a) You will not be able to decide whether or not the wall has additionally moved
inward.
(b) If the wall has moved inward, the cracks would commonly be wider on the inner face.
(c) If the wall has moved inward, cracks will normally be wider on the outdoor face.
(d) You ought to not be involved except the crack is as a minimum ¼ in width.
If the wall has moved inward, the cracks would normally be wider on the inner face
11. On most steep roofs, uncovered fasteners are
(a) Used for anchorage towards wind.
(b) A sign of negative installation.
(c) A signal of suitable installation.
(d) Used to save you ice dams.
A signal of terrible installation
12. All of the subsequent are slab-on-grade-production techniques EXCEPT
(a) Monolithic slab.
(b) Floating slab.
(c) Inverted slab.
(d) Reinforced slab.
Inverted slab
thirteen. Masonry chimneys need to have a clearance from combustible framing participants of
(a) 1 inch.
(b) 2 inches.
(c) four inches.
(d) 12 inches.
2 inches
14. Efflorescence
(a) Is related to water shifting via masonry partitions.
(b) Can most effective seem at the bloodless facet of a wall.
, (c) Only occurs in freezing climates.
(d) Is an natural increase.
Is related to water shifting thru masonry partitions
15. On a traditional cut up-machine air-conditioning system, the high-pressure side is the portion
of the refrigerant line from the
(a) Compressor to the enlargement device.
(b) Metering device to the evaporator coil.
(c) Expansion device to the compressor.
(d) Evaporator to the compressor.
Compressor to the enlargement device.
16. The presence of step flashing on an asphalt shingle roof can usually be demonstrated via
(a) Looking on the counter flashing.
(b) Knowing the age of the shingles on the roof.
(c) Knowing the wide variety of layers of shingles at the roof.
(d) Lifting the shingles adjacent to the chimney or wall
Lifting the shingles adjacent to the chimney or wall
17. Why are you more likely to look a house with a complete basement in cold northern climates
than in warm southern climates?
(a) People in cold climates have snow removal equipment to save.
(b) Having to excavate below the frost line for the footings makes a basement fee powerful.
(c) Homes with basements want heat. In southern climates, it's miles a waste of electricity to
heat the basement.
(d) There is a lot of bedrock in the southern climates " blasting might be required to make a
basement.
Having to excavate below the frost line for the footings makes a basement value effective.
18. All of the following are benefits to having customers attend inspections EXCEPT
(a) An possibility for better communication.
(b) You can fee a top class for permitting clients to wait.
(c) That displaying is better than telling.
(d) You have the possibility to modify expectancies.
You can fee a top rate for permitting customers to wait
1. Where you have discovered evidence of footing settlement, how can you are expecting
whether or not there might be similarly agreement?
(a) You can be counted the range of planes of motion.
(b) You can decide the sort of basis material.
(c) You cannot predict agreement from a unmarried inspection.
(d) You can decide the intensity of the footing.
You cannot predict settlement from a unmarried inspection
2. You usually discover a Freon leak
(a) As an oil stain
(b) As refrigerant coming out of the Freon line in the shape of a chilly mist.
(c) By the sturdy smell.
(d) By looking for evidence of ice along the refrigerant traces
As an oil stain
three. Typical wooden frame wall assemblies consist of all of the following components
EXCEPT.
(a) Studs
(b) Bridging
(c) Sheathing
(d) Siding
Bridging
4. All of the subsequent are commonplace processes to improving chimney draft EXCEPT
(a) Adding a draft inducer fan.
(b) Adding a rain cap.
(c) Extending the chimney upward.
(d) Resloping the cap.
Resloping the cap
five. All of the subsequent statements are actual of shrinkage cracks EXCEPT that
,(a) Shrinkage cracks do no longer normally go into the footings.
(b) Shrinkage cracks do not necessarily have corresponding cracks
some other place inside the constructing.
(c) Vertical shear is associated with shrinkage cracks.
(d) Shrinkage cracks are commonplace with poured concrete basis
partitions.
Vertical shear is related to shrinkage cracks
6. Which of the subsequent is NOT commonly a aspect of a private water deliver machine?
(a) Foot valve
(b) Pump
(c) Pressure regulator
(d) Pressure tank
Pressure regulator
7. Split-machine, air-cooled, imperative air-conditioning systems have what number of fans?
(a) None
(b) One
(c) Two
(d) Four
Two
8. Insulated steel outside doorways with storm doors ought to be averted because they'll
(a) Increase warmness loss.
(b) Increase air leakage.
(c) Overheat.
(d) Have poor architectural appeal.
Overheat
9. You plug your circuit tester into an outlet that has a showering system plugged into it. Your
tester suggests that the hole is well stressed and down to earth. How may want to you enhance
this inspection procedure?
(a) Use a voltage tester
(b) Use a circuit tester with a GFI test button
(c) Unplug the washing gadget
(d) Turn the washing system on earlier than doing all your test.
,Unplug the showering machine
10. Given a basis wall this is cracked because of horizontal pressure
(a) You will not be able to decide whether or not the wall has additionally moved
inward.
(b) If the wall has moved inward, the cracks would commonly be wider on the inner face.
(c) If the wall has moved inward, cracks will normally be wider on the outdoor face.
(d) You ought to not be involved except the crack is as a minimum ¼ in width.
If the wall has moved inward, the cracks would normally be wider on the inner face
11. On most steep roofs, uncovered fasteners are
(a) Used for anchorage towards wind.
(b) A sign of negative installation.
(c) A signal of suitable installation.
(d) Used to save you ice dams.
A signal of terrible installation
12. All of the subsequent are slab-on-grade-production techniques EXCEPT
(a) Monolithic slab.
(b) Floating slab.
(c) Inverted slab.
(d) Reinforced slab.
Inverted slab
thirteen. Masonry chimneys need to have a clearance from combustible framing participants of
(a) 1 inch.
(b) 2 inches.
(c) four inches.
(d) 12 inches.
2 inches
14. Efflorescence
(a) Is related to water shifting via masonry partitions.
(b) Can most effective seem at the bloodless facet of a wall.
, (c) Only occurs in freezing climates.
(d) Is an natural increase.
Is related to water shifting thru masonry partitions
15. On a traditional cut up-machine air-conditioning system, the high-pressure side is the portion
of the refrigerant line from the
(a) Compressor to the enlargement device.
(b) Metering device to the evaporator coil.
(c) Expansion device to the compressor.
(d) Evaporator to the compressor.
Compressor to the enlargement device.
16. The presence of step flashing on an asphalt shingle roof can usually be demonstrated via
(a) Looking on the counter flashing.
(b) Knowing the age of the shingles on the roof.
(c) Knowing the wide variety of layers of shingles at the roof.
(d) Lifting the shingles adjacent to the chimney or wall
Lifting the shingles adjacent to the chimney or wall
17. Why are you more likely to look a house with a complete basement in cold northern climates
than in warm southern climates?
(a) People in cold climates have snow removal equipment to save.
(b) Having to excavate below the frost line for the footings makes a basement fee powerful.
(c) Homes with basements want heat. In southern climates, it's miles a waste of electricity to
heat the basement.
(d) There is a lot of bedrock in the southern climates " blasting might be required to make a
basement.
Having to excavate below the frost line for the footings makes a basement value effective.
18. All of the following are benefits to having customers attend inspections EXCEPT
(a) An possibility for better communication.
(b) You can fee a top class for permitting clients to wait.
(c) That displaying is better than telling.
(d) You have the possibility to modify expectancies.
You can fee a top rate for permitting customers to wait
