ESAMS EM-385-1-1 Exam Updated Questions &
Correct Verified Answers | Safety Study Guide
|100% Guarantee Pass |Well Reviewed and
Revised |Graded A+ and Analysed| Latest Exam
and Newest Version!!!
Stored lumber to be handled manually shall be stacked not more
than ________ feet high.
A.8
B.12
C.16
D.20
ANSWER: C.16
All Personal Flotation Devices shall be of a highly visible
orange/reddish color. In addition, PFD's shall:
A.Have retroreflective material on front and back per USCG
requirements.
B.Have a USCG approved automatically activated light unless used
only during daylight hours.
C.Both a & b
D.Be replaced every six months
ANSWER: C.Both a & b
A confined space is a space that:
A.is large enough and so configured that a person can bodily enter
and perform assigned work.
B.has limited or restricted means for entry or exit.
,C.is not designed for continuous employee occupancy.
D.all of the above
ANSWER: D.all of the above
For limited scope supply, service and R&D contracts, the
Contracting Officer
A.doesnt need to worry about safety.
B.may not change the contract safety requirements.
C.may authorize an abbreviated APP.
D.may combine contracts.
ANSWER: C.may authorize an abbreviated APP.
When setting up a ladder, the step across distance from the nearest
edge of the ladder to the nearest edge of equipment or structure
shall be not more than ______ inches, or less than ______ inches.
A.10; 5
B.12; 2.5
C.15; 7
D.12; 6
ANSWER: B.12; 2.5
Where the movement of materials may be hazardous to persons,
__________ or other devices shall be used to control the loads being
handled by hoisting equipment.
A.taglines
B.banding
C.cradles
D.none of the above
ANSWER: A.taglines
At the beginning of each shift, a CP shall perform a ________________
of all running ropes, counterweight ropes, and load trolley ropes in
accordance with Section 16, applicable ASME standards, OSHA
regulations, and the manufacturer's recommendations.
A.Initial inspection
,B.Visual inspection
C.NDT inspection
D.Annual inspection
ANSWER: B.Visual inspection
Open containers such as barrels, pails, or tanks, may be used for
drinking water if properly sterilized.
A.True
B.False
ANSWER: B.False
When a boiler is being placed in service, an operator shall be in
constant attendance _______.
A.until controls have functioned through several cycles.
B.for a period of 24 hours.
C.a or b, whichever is greater.
D.Only the inspector must remain in attendance
ANSWER: C.a or b, whichever is greater.
On portable ladders, spacing of rungs shall be ________ on center
and uniform.
A.12 inches
B.8 to 14 inches
C.no more than 15 inches
D.no less than 10 inches
ANSWER: A.12 inches
Medical facilities and personnel expected to treat injured employees
shall ______.
A.be informed of the nature of the work to be performed.
B.be informed of the injuries/illnesses prevalent on such jobsites.
C.both a & b
D.have proper insurance coverage.
ANSWER: C.both a & b
, All training will be documented in writing, to include the date, name,
content, and ________.
A.Trainer
B.Test scores.
C.Certificates issued.
D.Weather
ANSWER: A.Trainer
Airborne contaminants created by portable equipment (such as
drills, saws, and grinding machines) in concentrations exceeding
acceptable safe limits shall be _______ at the source.
A.completely eliminated
B.be reduced
C.effectively controlled
D.none of the above.
ANSWER: C.effectively controlled
The provisions of this manual implement and supplement the safety
and health standards and requirements contained in 29 CFR 1910,
29 CFR 1926, 29 CFR 1960, EO 12196, FAR Clause 52.236.13, DODI
6055.1, AR 40-5, and AR 385-10. Where more stringent safety and
occupational health standards are set forth in these requirements
and regulations, ____________.
A.COE-385-1-1 will apply
B.29 CFR 1910 will apply
C.29 CFR 1926 will apply
D.The more stringent shall apply
ANSWER: D.The more stringent shall apply
Radial arm power saws shall be equipped with an ___________.
A.automatic brake
B.automatic vacuum
C.laser guided line
D.depth gage
Correct Verified Answers | Safety Study Guide
|100% Guarantee Pass |Well Reviewed and
Revised |Graded A+ and Analysed| Latest Exam
and Newest Version!!!
Stored lumber to be handled manually shall be stacked not more
than ________ feet high.
A.8
B.12
C.16
D.20
ANSWER: C.16
All Personal Flotation Devices shall be of a highly visible
orange/reddish color. In addition, PFD's shall:
A.Have retroreflective material on front and back per USCG
requirements.
B.Have a USCG approved automatically activated light unless used
only during daylight hours.
C.Both a & b
D.Be replaced every six months
ANSWER: C.Both a & b
A confined space is a space that:
A.is large enough and so configured that a person can bodily enter
and perform assigned work.
B.has limited or restricted means for entry or exit.
,C.is not designed for continuous employee occupancy.
D.all of the above
ANSWER: D.all of the above
For limited scope supply, service and R&D contracts, the
Contracting Officer
A.doesnt need to worry about safety.
B.may not change the contract safety requirements.
C.may authorize an abbreviated APP.
D.may combine contracts.
ANSWER: C.may authorize an abbreviated APP.
When setting up a ladder, the step across distance from the nearest
edge of the ladder to the nearest edge of equipment or structure
shall be not more than ______ inches, or less than ______ inches.
A.10; 5
B.12; 2.5
C.15; 7
D.12; 6
ANSWER: B.12; 2.5
Where the movement of materials may be hazardous to persons,
__________ or other devices shall be used to control the loads being
handled by hoisting equipment.
A.taglines
B.banding
C.cradles
D.none of the above
ANSWER: A.taglines
At the beginning of each shift, a CP shall perform a ________________
of all running ropes, counterweight ropes, and load trolley ropes in
accordance with Section 16, applicable ASME standards, OSHA
regulations, and the manufacturer's recommendations.
A.Initial inspection
,B.Visual inspection
C.NDT inspection
D.Annual inspection
ANSWER: B.Visual inspection
Open containers such as barrels, pails, or tanks, may be used for
drinking water if properly sterilized.
A.True
B.False
ANSWER: B.False
When a boiler is being placed in service, an operator shall be in
constant attendance _______.
A.until controls have functioned through several cycles.
B.for a period of 24 hours.
C.a or b, whichever is greater.
D.Only the inspector must remain in attendance
ANSWER: C.a or b, whichever is greater.
On portable ladders, spacing of rungs shall be ________ on center
and uniform.
A.12 inches
B.8 to 14 inches
C.no more than 15 inches
D.no less than 10 inches
ANSWER: A.12 inches
Medical facilities and personnel expected to treat injured employees
shall ______.
A.be informed of the nature of the work to be performed.
B.be informed of the injuries/illnesses prevalent on such jobsites.
C.both a & b
D.have proper insurance coverage.
ANSWER: C.both a & b
, All training will be documented in writing, to include the date, name,
content, and ________.
A.Trainer
B.Test scores.
C.Certificates issued.
D.Weather
ANSWER: A.Trainer
Airborne contaminants created by portable equipment (such as
drills, saws, and grinding machines) in concentrations exceeding
acceptable safe limits shall be _______ at the source.
A.completely eliminated
B.be reduced
C.effectively controlled
D.none of the above.
ANSWER: C.effectively controlled
The provisions of this manual implement and supplement the safety
and health standards and requirements contained in 29 CFR 1910,
29 CFR 1926, 29 CFR 1960, EO 12196, FAR Clause 52.236.13, DODI
6055.1, AR 40-5, and AR 385-10. Where more stringent safety and
occupational health standards are set forth in these requirements
and regulations, ____________.
A.COE-385-1-1 will apply
B.29 CFR 1910 will apply
C.29 CFR 1926 will apply
D.The more stringent shall apply
ANSWER: D.The more stringent shall apply
Radial arm power saws shall be equipped with an ___________.
A.automatic brake
B.automatic vacuum
C.laser guided line
D.depth gage
