ME1 SWE || 100% no Error.
What are 3 types of restricted areas correct answers Exclusion area, limited area, controlled area
In what intervals are restricted signs placed on a fence? correct answers 100 foot intervals
Where are restricted signs placed on a wall or bulkhead? correct answers Points of entry/exit
Physical barriers used in two lines should be separated by no less than what? correct answers 30
feet and in conjunction with ids
Fencing requirements correct answers Fabric 9 gauge sink or aluminum, no less than 2"
openings, twisted and barbed selvage top and bottom.
Fabric ties 9 gauge steel ties
Height 8 feet, fabric height 7ft with a top guard
Two inches from firm or hurried in soft soil
What are the requirements of a top guard? correct answers Approximately at a 45° angle, 3
strands of 12 gauge barbed wire equally spaced
What's the requirements for a perimeter or boundary that passes through an isolated area that is
unpatrolled? correct answers 3 or 4 strand 12 gauge barbed wire fence approximately 4 feet high,
signs every 100ft one foot from the top.
vegitation inside clear zones must not exceed how many inches? correct answers 8 inches in
height
An inside clear zone should be how large? correct answers 30 ft
An outside clear zone shall be? correct answers 20 ft or greater
, Windows, skylights and other openings that penetrate the restricted area perimeter that are 90
square inches or greater shall be protected by what? correct answers Securely fastened nine
gauge wire mesh framed and permanently bolted to the structure.
Restricted areas that are also classified spaces signs shall be what size? correct answers
Approximately 2ft X 2ft at external points of entry
Restricted area perimeters signs shall be posted how? correct answers 100ft intervals
approximately 3ft from the top with signs measuring 12 inches by 18inches
Government property boundaries and non- restricted area perimeters shall be posted at what?
correct answers 200ft intervals measured approximately 11x12 inches in size
What are the 4 types of lighting? correct answers Continuous, standby, movable, emergency
What are the lighting concepts? correct answers Direct, indirect, intermittent and responsive area
illumination.
What goes in the second paragraph of the LE sitrep? correct answers ACTION
What is the time requirements for a LE sitrep? correct answers 24 Hours
What's in the final paragraph of a UOF report? correct answers CO comments
What is the thickness of the tie bar for men? correct answers 3/16 of an inch
What's the earrings size for women? correct answers 4-6mm
What are 3 types of restricted areas correct answers Exclusion area, limited area, controlled area
In what intervals are restricted signs placed on a fence? correct answers 100 foot intervals
Where are restricted signs placed on a wall or bulkhead? correct answers Points of entry/exit
Physical barriers used in two lines should be separated by no less than what? correct answers 30
feet and in conjunction with ids
Fencing requirements correct answers Fabric 9 gauge sink or aluminum, no less than 2"
openings, twisted and barbed selvage top and bottom.
Fabric ties 9 gauge steel ties
Height 8 feet, fabric height 7ft with a top guard
Two inches from firm or hurried in soft soil
What are the requirements of a top guard? correct answers Approximately at a 45° angle, 3
strands of 12 gauge barbed wire equally spaced
What's the requirements for a perimeter or boundary that passes through an isolated area that is
unpatrolled? correct answers 3 or 4 strand 12 gauge barbed wire fence approximately 4 feet high,
signs every 100ft one foot from the top.
vegitation inside clear zones must not exceed how many inches? correct answers 8 inches in
height
An inside clear zone should be how large? correct answers 30 ft
An outside clear zone shall be? correct answers 20 ft or greater
, Windows, skylights and other openings that penetrate the restricted area perimeter that are 90
square inches or greater shall be protected by what? correct answers Securely fastened nine
gauge wire mesh framed and permanently bolted to the structure.
Restricted areas that are also classified spaces signs shall be what size? correct answers
Approximately 2ft X 2ft at external points of entry
Restricted area perimeters signs shall be posted how? correct answers 100ft intervals
approximately 3ft from the top with signs measuring 12 inches by 18inches
Government property boundaries and non- restricted area perimeters shall be posted at what?
correct answers 200ft intervals measured approximately 11x12 inches in size
What are the 4 types of lighting? correct answers Continuous, standby, movable, emergency
What are the lighting concepts? correct answers Direct, indirect, intermittent and responsive area
illumination.
What goes in the second paragraph of the LE sitrep? correct answers ACTION
What is the time requirements for a LE sitrep? correct answers 24 Hours
What's in the final paragraph of a UOF report? correct answers CO comments
What is the thickness of the tie bar for men? correct answers 3/16 of an inch
What's the earrings size for women? correct answers 4-6mm
