MK1 SWE || ALL SOLUTIONS ARE ACCURATE.
what are two types of maintenance correct answers Corrective and preventative
What article always captain to conduct NJP correct answers Article 15
Where two types of procedures that may be accessed from maintenance procedure option correct
answers Official and local
Who is authorized to conduct tag outs correct answers Authorizing officer
Out of calibration tags should be used when correct answers When indicating parameter errors
are small and consistent
For modernized units the boat inspection reports are to be entered through correct answers
Almis/ EALpage
Cutter engineering report shall be completed in accordance with correct answers Naval
engineering manual chapter 90
On an MPC the warning shall come where in the text correct answers Before the instruction
On an MPC what would constitute an expendable correct answers Rags
PMS that does not need to be included in the cutter engineering report is correct answers Daily
and weekly
With regards to casreps what is mandatory on all updates corrects and cancellations correct
answers REF
, Which unit besides a shore unit are exempt from filling out the POSIT line correct answers
Cutter underway
A casrep it should be made as soon as possible no later than ____hours correct answers 24
Casualties that effect a secondary mission should always have a casualty category of correct
answers 2
AMPN is mandatory after any set that contains an entry of? correct answers Other, tech, none
In a 1PARTSID if the NIIN is not known what needs to be put in the line correct answers
Unknown
What is the criteria for submitting CASCOR correct answers The delay expressed an hours, and
correcting the casualty due to parts unavailability, a list of all parts requested and dates received;
the total number of man-hours expanded; the number of equipment hours since last failure
You find something else wrong with the piece of equipment that has already been CASREP'd
you should send an? correct answers Update
Where do you find the hierarchy of guidance for specification plans correct answers NEM
chapter 41
Which specifications may be used as a guided researching propose engineering changes and
solutions correct answers GSO
Which specification do not apply to construction, alteration or maintenance of Coast Guard
cutters correct answers Commercial general specifications for t-ships
what are two types of maintenance correct answers Corrective and preventative
What article always captain to conduct NJP correct answers Article 15
Where two types of procedures that may be accessed from maintenance procedure option correct
answers Official and local
Who is authorized to conduct tag outs correct answers Authorizing officer
Out of calibration tags should be used when correct answers When indicating parameter errors
are small and consistent
For modernized units the boat inspection reports are to be entered through correct answers
Almis/ EALpage
Cutter engineering report shall be completed in accordance with correct answers Naval
engineering manual chapter 90
On an MPC the warning shall come where in the text correct answers Before the instruction
On an MPC what would constitute an expendable correct answers Rags
PMS that does not need to be included in the cutter engineering report is correct answers Daily
and weekly
With regards to casreps what is mandatory on all updates corrects and cancellations correct
answers REF
, Which unit besides a shore unit are exempt from filling out the POSIT line correct answers
Cutter underway
A casrep it should be made as soon as possible no later than ____hours correct answers 24
Casualties that effect a secondary mission should always have a casualty category of correct
answers 2
AMPN is mandatory after any set that contains an entry of? correct answers Other, tech, none
In a 1PARTSID if the NIIN is not known what needs to be put in the line correct answers
Unknown
What is the criteria for submitting CASCOR correct answers The delay expressed an hours, and
correcting the casualty due to parts unavailability, a list of all parts requested and dates received;
the total number of man-hours expanded; the number of equipment hours since last failure
You find something else wrong with the piece of equipment that has already been CASREP'd
you should send an? correct answers Update
Where do you find the hierarchy of guidance for specification plans correct answers NEM
chapter 41
Which specifications may be used as a guided researching propose engineering changes and
solutions correct answers GSO
Which specification do not apply to construction, alteration or maintenance of Coast Guard
cutters correct answers Commercial general specifications for t-ships
