CSWA CERTIFICATION EXAM QUESTIONS
WITH 100% CORRECT ANSWERS
What type of rectangle tool adds centerlines when the sketch entity is drawn? - Answer-
Center Rectangle
What rectangle tool requires more than two points to be selected in order to draw the
sketch entity? - Answer- Parallelogram
True or False - To create a "3 Point Center Rectangle", you first click at the center point,
then click at the midpoint of one edge of the rectangle, and then click to set the height of
the rectangle. - Answer- True
True or False - Two identical rectangles can be created by sketching one rectangle on
top of another and then dragging it to a new position. - Answer- False
What circle tool requires clicking three points to draw the circle? - Answer- Perimeter
Circle
True or False - The center point of a Perimeter circle cannot be selected since it is
interpolated using the three selected points on the perimeter. - Answer- False
What option enables multiple fillets to be created that reference a single dimensioned
fillet? - Answer- Dimension each fillet
True or False - When creating a sketch chamfer, the order in which the geometry is
selected does not matter. - Answer- False
What operations will invoke the trim entities command? - Answer- Tools>Sketch
Tools>Trim Entities, Command Manager->Sketch Toolbar->Trim Entities, Right Click on
sketch->Trim entities
What trimming method is considered to be the most flexible trimming method and
requires the cursor to be dragged over the entities to be erased? - Answer- Power Trim
What trimming method can be used to trim or extend an entity to the nearest
intersection? - Answer- Trim to Closest
The function of the red square which appears as the power cursor is being dragged is
_____. - Answer- To allow the user to undo unwanted trims
WITH 100% CORRECT ANSWERS
What type of rectangle tool adds centerlines when the sketch entity is drawn? - Answer-
Center Rectangle
What rectangle tool requires more than two points to be selected in order to draw the
sketch entity? - Answer- Parallelogram
True or False - To create a "3 Point Center Rectangle", you first click at the center point,
then click at the midpoint of one edge of the rectangle, and then click to set the height of
the rectangle. - Answer- True
True or False - Two identical rectangles can be created by sketching one rectangle on
top of another and then dragging it to a new position. - Answer- False
What circle tool requires clicking three points to draw the circle? - Answer- Perimeter
Circle
True or False - The center point of a Perimeter circle cannot be selected since it is
interpolated using the three selected points on the perimeter. - Answer- False
What option enables multiple fillets to be created that reference a single dimensioned
fillet? - Answer- Dimension each fillet
True or False - When creating a sketch chamfer, the order in which the geometry is
selected does not matter. - Answer- False
What operations will invoke the trim entities command? - Answer- Tools>Sketch
Tools>Trim Entities, Command Manager->Sketch Toolbar->Trim Entities, Right Click on
sketch->Trim entities
What trimming method is considered to be the most flexible trimming method and
requires the cursor to be dragged over the entities to be erased? - Answer- Power Trim
What trimming method can be used to trim or extend an entity to the nearest
intersection? - Answer- Trim to Closest
The function of the red square which appears as the power cursor is being dragged is
_____. - Answer- To allow the user to undo unwanted trims
