OMGT 4313 COMPREHENSIVE STUDY
GUIDE 2026 FULL QUESTIONS AND
SOLUTIONS GRADED A+
◍ The just-in-time philosophy applies only to the production floor of a
manufacturing company..
Answer: F
◍ What are four basic types of SUAs?.
Answer: Restricted area, Warning areas, MOA, and CFA.
◍ Who is the individual responsible for controlling and coordinating all ranges
and publishing safe range use requirements?.
Answer: Range Management Authority.
◍ The five steps of the Risk Management process include identify hazards,
assess hazards, make risk decisions, implement controls and, ______..
Answer: supervise and evaluate.
◍ Your unit is conducting a .50-caliber machine gun exercise using M2 ball
ammunition firing into an earth impact media. Using the table displayed
below, which of the following represents the correct value for Distance X?.
Answer: 6500m
◍ Which of the following statements regarding supply chain synchronization
using kanbans is BEST?.
Answer: For the system to work properly, demand rates must be relatively
stable and interruptions must be minimized.
◍ Who is responsible to make certain that all weapons and personnel are in
their proper position and that only authorized ammunition, explosives,
charges, fuses, and fuse settings are used..
, Answer: RSO.
◍ Lean supply chain management focuses on eliminating waste.
Answer: in all of the above areas
◍ An increase in the safety factor results in an increase in the amount of
inventory in a kanban system..
Answer: T
◍ Livermore Industries uses a kanban system to manage production of the
KR-9 subassembly. In a ten-hour day they use 1500 units and use containers
that can hold 50 units each. It takes 45 minutes to fill and move a container
of parts to the right place on the KR-9 line that is currently rated at a 15%
safety factor. How many production cards are needed?.
Answer: 3
◍ You are the OIC for a convoy operations and small arms exercise. Your
commanding officer informs you that he would like to shoot mortars with
HE in support of maneuvering troops. You tell him that you cannot allow
that to happen for the following reason:.
Answer: Range control has not given clearance to shoot HE mortars.
◍ In a single-card kanban system.
Answer: the single card is the production card
◍ A reduction in inventory levels forces a company to improve manufacturing
practices..
Answer: T
◍ Observing that the unit does not have any ear plugs for the upcoming
exercise would be an example of what step in the DRM process?.
Answer: Identify Hazards.
◍ Which of the following is a type of SDZ for small arms..
Answer: Batwing.
◍ You have been tasked with selecting an RSO for a MK-19 exercise. While
you have four trustworthy weapons systems qualified personnel to choose
GUIDE 2026 FULL QUESTIONS AND
SOLUTIONS GRADED A+
◍ The just-in-time philosophy applies only to the production floor of a
manufacturing company..
Answer: F
◍ What are four basic types of SUAs?.
Answer: Restricted area, Warning areas, MOA, and CFA.
◍ Who is the individual responsible for controlling and coordinating all ranges
and publishing safe range use requirements?.
Answer: Range Management Authority.
◍ The five steps of the Risk Management process include identify hazards,
assess hazards, make risk decisions, implement controls and, ______..
Answer: supervise and evaluate.
◍ Your unit is conducting a .50-caliber machine gun exercise using M2 ball
ammunition firing into an earth impact media. Using the table displayed
below, which of the following represents the correct value for Distance X?.
Answer: 6500m
◍ Which of the following statements regarding supply chain synchronization
using kanbans is BEST?.
Answer: For the system to work properly, demand rates must be relatively
stable and interruptions must be minimized.
◍ Who is responsible to make certain that all weapons and personnel are in
their proper position and that only authorized ammunition, explosives,
charges, fuses, and fuse settings are used..
, Answer: RSO.
◍ Lean supply chain management focuses on eliminating waste.
Answer: in all of the above areas
◍ An increase in the safety factor results in an increase in the amount of
inventory in a kanban system..
Answer: T
◍ Livermore Industries uses a kanban system to manage production of the
KR-9 subassembly. In a ten-hour day they use 1500 units and use containers
that can hold 50 units each. It takes 45 minutes to fill and move a container
of parts to the right place on the KR-9 line that is currently rated at a 15%
safety factor. How many production cards are needed?.
Answer: 3
◍ You are the OIC for a convoy operations and small arms exercise. Your
commanding officer informs you that he would like to shoot mortars with
HE in support of maneuvering troops. You tell him that you cannot allow
that to happen for the following reason:.
Answer: Range control has not given clearance to shoot HE mortars.
◍ In a single-card kanban system.
Answer: the single card is the production card
◍ A reduction in inventory levels forces a company to improve manufacturing
practices..
Answer: T
◍ Observing that the unit does not have any ear plugs for the upcoming
exercise would be an example of what step in the DRM process?.
Answer: Identify Hazards.
◍ Which of the following is a type of SDZ for small arms..
Answer: Batwing.
◍ You have been tasked with selecting an RSO for a MK-19 exercise. While
you have four trustworthy weapons systems qualified personnel to choose
